Timer recording, Case timer programs-overlap

Recording

7Press TIMER REC. The timer indicator “ ” will appear on the display and the unit stands by for recording.

¥If the program is DVD recording only, the unit will change to VCR mode automatically. (The DVD mode cannot be selected.)

¥If the program is VCR recording only, the unit will change to DVD mode automatically. (The VCR mode cannot be selected.)

¥If the programs are DVD and VCR recording, the unit will turn off. If you want to use the unit, press TIMER REC again to deactivate the timer.

Checking or changing the timer recording

When you want to check the selected timer recording, follow the steps 1 and 2 of ÒSetting timer recordingÓ and display the TIMER REC SET screen.

To change the timer recording, select the program to be changed and press ENTER. The changing method is the same as that for the recording a program for the first time.

Cancelling the timer recording Display the TIMER REC SET screen.

Select the program you want to cancel and press CLEAR/CANCEL, then the selected program will be erased from the timer recording list.

In case timer programs-overlap

Do not overlap timer programs as portions of the conflicting programs will be lost. The first recording time has priority over the next recording time as shown in the diagram below.

In this case, the next recording time is delayed a maximum of about 1 minute.

8 : 00 9 : 00 10 : 00 11 : 00

Program 1

Program 2
		Deleted Parts
Program 3
		Non Recorded Portion Parts
Recording	Prog.1	Prog.2	Prog.3
Control Settings

Note

¥Recording starts a few seconds before the preset starting time.

¥You cannot use the timer recording for the both DVD and VCR at the same time.

¥You can playback the DVD during the VCR timer recording, and you can playback the VCR during the DVD timer recording.

¥If a recordable tape is not inserted or no disc space

is available, the timer record indicator ÒÓ flashes. Replace the tape or disc to allow recording.

Timer recording

VR mode Video mode

DVD-R

VCR

The timer recording system allows you to select the date, time and channel and record the desired pro- grams. Up to 8 timer programs within a month can be stored in this unit.

Setting timer recording

Preparation:

¥Turn ON the TV and set to the video input mode.

¥Load a recordable DVD or video tape.

¥Press DVD/VCR to select the appropriate mode.

¥Confirm that the clock is indicating the correct time.

Example:

Set the recording mode to LP; the TV program is on channel 12 starting at 8:00 PM and stopping at 9:30 PM on a date of 20th.