Recording | 06 |
10 Press or to select “REC MODE” and press
ENTER.
The recording modes for the media selected in ÒREC TOÓ item are listed.
Select the recording mode and press ENTER.
For the recording modes in VCR, see page 48, and for the recording modes in DVD, see page 52.
SETUP MENU
|
|
|
| TIMER REC SET |
|
| ||
| TYPE |
|
|
| ONCE | REC | REC | |
|
|
|
| TO | MODE | |||
| DATE (MM/DD) |
|
| 11/20(TH) |
|
| ||
| START |
|
|
| 08:00PM |
|
| |
| END |
|
|
| 09:30PM |
|
| |
| CH |
|
|
| 12 |
|
| |
| REC TO |
|
|
| DVD |
|
| |
| REC MODE |
|
| LP |
|
| ||
|
|
| OK |
|
|
| ||
|
| SELECT |
|
|
|
|
| |
ENTER/ | ENTER | RETURN | BACK | SETUP | END | |||
SELECT | ||||||||
|
|
|
|
|
| |||
11 Select “OK” and press ENTER.
The timer program is determined and the TIMER REC SET screen appears again.
12When you enter the other program for the timer recording, repeat the steps 3 to 11.
13Press SETUP.
The TIMER REC SET screen disappears and the display will return to the normal screen.
14Press TIMER REC. The timer indicator “ 
” will appear on the display and the unit stands by for
recording.
¥If the program is DVD recording only, the unit will change to VCR mode automatically. (The DVD mode cannot be selected.)
¥If the program is VCR recording only, the unit will change to DVD mode automatically. (The VCR mode cannot be selected.)
¥If the programs are DVD and VCR recording, the unit will turn off. If you want to use the unit, press TIMER REC again to deactivate the timer.
Checking or changing the timer recording
When you want to check the selected timer recording, follow the steps 1 and 2 of ÒSetting timer recordingÓ and display the TIMER REC SET screen.
To change the timer recording, select the program to be changed and press ENTER. The changing method is the same as that for the recording a program for the first time.
Cancelling the timer recording Display the TIMER REC SET screen.
Select the program you want to cancel and press CLEAR/CANCEL, then the selected program will be erased from the timer recording list.
In case timer programs-overlap
Do not overlap timer programs as portions of the conflicting programs will be lost. The first recording time has priority over the next recording time as shown in the diagram below.
In this case, the next recording time is delayed a maximum of about 1 minute.
8 : 00 9 : 00 10 : 00 11 : 00
Program 1
Program 2 |
|
|
|
|
| Deleted Parts |
|
Program 3 |
|
|
|
|
| Non Recorded Portion Parts |
|
Recording | Prog.1 | Prog.2 | Prog.3 |
Control Settings |
|
|
|
Note
¥Recording starts a few seconds before the preset starting time.
¥You cannot use the timer recording for the both DVD and VCR at the same time.
¥You can playback the DVD during the VCR timer recording, and you can playback the VCR during the DVD timer recording.
¥If a recordable tape is not inserted or no disc space
is available, the timer record indicator Ò
Ó flashes. Replace the tape or disc to allow recording.
61
En