Recording
4 Press REC.
When recording starts, Ò Ó appears on the screen for about 4 seconds.
Note
¥When recording onto a DVD, it takes some time from when you press REC until recording actually starts.
Press REC a little before your preferred starting point.
With a video tape, recording starts almost at the same time you press REC.
¥If the erase prevention tab of video tapes is removed, the tape will eject when REC is pressed for recording.
Auto Rewind feature
This VCR will automatically rewind the tape when the tape has ended (except during OTR and TIMER REC). It will also eject the tape.
Note
¥If the disc space become full, the recording is stopped and ÒRECORDING INTERRUPTEDÓ will appear on the screen.
To stop recording
Press STOP to stop recording.
ÒÓ will appear on the screen for about 4 seconds.
Note
¥When recording onto a DVD, even if STOP is pressed during recording, recording does not stop instantly. Recording may continue for as long as 5 seconds in the VR mode or 30 seconds in the Video mode.
To stop recording temporarily
Press PAUSE/STILL to avoid recording unwanted material.
Ò¶8Ó will appear on screen for about 4 seconds. Press again to resume recording.
Note
¥In video recording, the pause function will be released after 5 minutes to prevent damage the video tape. The unit will change to the STOP mode.
¥When recording onto a video tape, you can select a recording channel in the recording pause mode (You cannot change a recording channel in the DVD recording pause mode.).
06
Recording one program while watching another While the unit is recording, press TV/VCR to select the TV position.
The ÒVCRÓ will go off and recording will continue. Select the TV channel you want to watch by using the TV channel selector.
Note
¥Some CATV hookups do not permit viewing one channel while recording another. See pages 18, 19.
55
En