RCA VR270 owner manual 121, Display prompts you to select AM or

Here are some things 3ou should

•When you firs,, plug in your VCR, the clock will read "

•The buttons for setting the clock are on the remote hand unit.

•While you are setting the clock, the display on the TV screen will prompt you through the procedure.

know before you set the clock:

•If you press a wrong digit, press PROGRAM and then start at beginning.

•The clock must be set to the correct time before

you can program the timer for unattended recordings or use Express Recording (XPRL

•If power is interrupted, you may have to reset the clock and re-enter your programs in the timer.

] Turn on 5'our VCR and T\'. Tune ','our TV to [ 1] the VCR Channel (channel 3 or 4)-. The VCR

Channel is explained on page 13.

TO SELECT MODE

PUSH HU_BCR 5HO_N

1 CLOCK SIT

Press PROGRAM on the remote control.

This "menu" will appear on the TV.

I

2	NORMAL	PROG_A_	Press "1" to set the clock
]	_AILY	(M-F)PROGRAM
4	WEEkLy	PRDGRAM
5	pRDGRRN	R[VIEW

TO END PUSH PROGRAM

121

The display prompts you to set the time.

CLOCK SIT

MONTHIDAV/YEAR

DhTE --/--1..

TO EH_ PUSH PROGRAM

Set the time by pressing two digit buttons on the remote for the current hour and two more for the minute.

(For example, press 0 2 I 5 for 2:15.)

Note: The CLEAR button does not operate in

clock set. If you make a mistake, press PROGRAM and start again.

F

131	_LO_	5IT
	TIME	02:1S	/
The display' prompts you to select AM or	-,_AM*I pM,_--
	DATE	HI--I°*
	MDNTH/D_y/y_"
PM.
TO	END PUSH PRDGRRM

Press "1" for AM or press "2" for PM.

Remember: Noon is 12:00 PM Midnight is 12:00 AM

I

141

The display prompts you to set the date.

I

ISl

The day of the week will appear when you

have entered all six digits for the date.

CLOCK SET

TIME 02:1_ pM

MO_TH,*DAy/y{_

TO _HD PUSH aROGRAM

CLOCK %ET

TIME 02:15 PN

MONTMIDRYIYEAR

DATE 07102189

SU_

TO END PUSH PROGRAM

Set the date by pressing six digits in order for the month, day, and s'ear. (For example, press 0 7 0 2 8 9 for July 2. 1989.)

Always press "0" before single-digit months and days.

Press PROGRAM to start the clock. (Note that the display' on the VCR will show the correct time after you press PROGRAM.

Press PROGRAM again to return to the program you were watching.

16