RCA VR270 owner manual Press to record, Play, Record, Rewind, Turns the Tape CounterI

Page 34

Selected models of RCA color TV receivers and

monitor/receivers feature remote controls that will also

control your VCR. Only the buttons that are used for controlling .','our VCR are described here. These buttons have generally the same functions as the ones v,'ith the

same names on the front panel of the VCR, but there are some differences.

•Any VCR tuner channel may be selected by pressing two of the Digit buttons on the hand unit. Press 0 first

to select tuner channels 1 through 9.

•Separate buttons turn the VCR on and off.

•Simply press the RECORD button to record. It is not necessary to press the PLAY button at the same time.

Press to Play.

Used for setting the clock and programming the timer.

Press to rewind when VCR is stopped or reverse scan when VCR is in Play mode,

Press again (or press PLAY) to return to normal playback

Press for fast forward when VCR is stopped or forward scan when

VCR is in Play mode

Press again (or press PLAY) to

return to normal playback

Used when programming the timer. A!SO resets tape counter when tape counter is displayed.

and put remote In "VCR Mode".

Other buttons on remote will not

_ Prei= this button to turn on VCR control the VCR until this button

Is pressed.

nc/i

Press to record.

Stops the normal VCR functions

of Play, Record, Rewind, and

Fast Forward.

Two buttons select any channel.

Press during Playback to display Stop Action. Press PAUSE again to resume normal playback. Can also be used to temporarily interrupt a recording.

Select next higher or lower channel in VCR's scan list.

Press to switch antenna between "IV and VCR (Same as TV/VGR button on VCR's remote.)

Turns the Tape CounterI

end Memory Stop features on and off. I

Press this button to turn on VCR

and put remote in "VCR Mode", Ot_er buttons on remote will not control the VCR until this button

IS pressed.

Two buttons select any channel

Press during Playback to display

Stop Action. Press PAUSE again

to resume normal Playback. Can

also be used to temporarily interrupt a recording.

Press tO record.

Used for programming the timer. Also resets the tape counter to 0000 (when tape counter is displayed).

Press to rewind when VCR is stopped. Press to reverse search

if VCR is playing. Press again (or press PLAY) to return

to normal playback.

PROGRAM: Used for setting the clock and programming the timer.

Turns power ott.

!Press once to display VCR status.

Press twice to display tape counter. Press three times to remove all displays.

Turns off power.

Stops the normal VCR functions of Play, Record, Rewind and Fast

Forward.

Select next higher or lower channel in VCR's scan list.

Press to play.

Press for fast forward when VCR

is stopped. Press for lorward search when VCR is playing. Press again (or press PLAY) to return to normal playback.

Press once to display VCR status,

Press twice to display tape counter.

Press three times to remove all displays.

Press to switch antenna between "rv and VCR. (Same as TV VCR button on VCR's remote.)

32

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Nell VideoCassette Recorder Dealer Model VR270 Serial Number Using This Manual On-Screen Remote Timer Programming-With RCAs CompactDesi.m-State-of-theminiaturization-artPage Location TYPtCALBasic Cable-TV Connections Back of VCRThis Cab,eVHF Back VCR to BackCo*i= Back of TVNot Co.,,aIIgp.W..d CorDSwitch ConnectionsTo UHF Antenna To TVs Operating InstructionsDirect Video and Audio Connections Video Used Only if You Have Home UHF AntennaUTO PROG/ADD/ERASE Buttons These Basic Operating Controls and DisplaysInserting and Removing Cassettes AreaErasing Channels from the Scan List Programming Active Channels into VCRs- TunerAdding Channels to the Scan List Using the TV VCR Button Simplified Installation ChecklistSetting Your IV to the VCR Channel Press Power to turn on VCRBatter3InstalLation BatteryButton Number ButtonsPLAYButton Stop Button Buon121 Display prompts you to select AM orOperating Notes Making a RecordingPlaying It Back Turn on PressLEt StOO,UE¢ Turned ADD/ERASE or Tracking ButtonsAppear Jacks Back=Picture Search Pause During RecordingPause for Stop-Action Playback Tracking ControlOn-Screen Display Turn on VCR You can proam the timer to do the-- followingSimplified Programming Instructions Press Program on the remote hand unitDisplay will show Start Date Clearing a Timer ProgramFollowed by the current or next date and day Stopping a Timer Recording in Proess Timer Recording From the Line InputStep Cassette Care and Storage Recording SpeedReading Quick 7onent Recording Tion Recording With Off On when you RecordNormal Viewing Recording Viewing the Same ProgramRecording and Viewing Different Programs Select Desired tape Indicator will light SpeedMake sure indicator is on Basic PlaybackSimplified Operating Instructions Dub TapesYounormallyuse Light WillTurns the Tape CounterI Press to recordPlay, Record, Rewind, Press during Playback to displayTimer. Also resets tape counter Used when setting the clock and programming the timerPlaces VCR in Pause mode when Moder Press again to release pause Press to turn off VCRCleaning Dusting attachment of ,our \acuum cleanerTransformers ConnectorsAdapters Number SpecialPLA Y Button Arrangements Timer ProgrammingTimer TimeMarcas Registraclas Job A-58530 E72t Thomson Consumer Electronics, IncPart Number 2826
Top Page Image Contents