RCA VR270 Recording and Viewing Different Programs, Basic Playback, Make sure indicator is on

Page 31

Recording and Viewing Different Programs

QTurn on "IV and tune it

to the VCR Channel (3 or 4).

insert cassette with record-protect tab intact.

he casseffe-in indicator will light.)_

lect channel you want to record.

(_) Press TV VCR button on remote to turn of1

indicator.

,___Press

CHANNEL buttons to

\

Select other channel you want to watch with "I'V'schannel buttons.

//	//		/.
/		,///
(_Press	TAPE SPEED to	(_Press	RECORD.
select	desired tape	( [_	indicator will light.)
speed.

Note: If you want to view what is being recorded, press the TV VCR button on the remote control to

turn on the _ indicator. Then tune your "IV to the VCR channel (3 or 4).

Basic Playback

to the VCR Channel		(3 or 4).	]	tape it necessary,
Insert	cassette."		/
@Turn	on TV and tune	it	@	Press REWto rewind
(_'he	cassette-in indicator will		_ig_J=u,._._

Press PLAY."

(The Ip indicator will light.)

*If the tape has the record protect tab removed, it will

automatically go into play. It is not necessary to press the PLAY button.

Make sure indicator is on.

Pressing the

"iV VCR button on

the remote turns

the ,_ indicator

/on and off,

I

/._.

/

XIf the tape was recorded on a different VCR. streaks may appear, To remove the streaks, press the TRACKING • or • button.

29

Image 31

Contents Nell VideoCassette Recorder Dealer Model VR270 Serial Number Using This Manual CompactDesi.m-State-of-theminiaturization-art On-Screen Remote Timer Programming-With RCAsPage TYPtCAL LocationBack of VCR Basic Cable-TV ConnectionsThis Cab,eVHF Back of TV VCR to BackCo*i= BackCorD Co.,,aIIgp.W..d NotConnections SwitchVideo Used Only if You Have Home UHF Antenna Operating InstructionsDirect Video and Audio Connections To UHF Antenna To TVsArea Basic Operating Controls and DisplaysInserting and Removing Cassettes UTO PROG/ADD/ERASE Buttons TheseErasing Channels from the Scan List Programming Active Channels into VCRs- TunerAdding Channels to the Scan List Press Power to turn on VCR Simplified Installation ChecklistSetting Your IV to the VCR Channel Using the TV VCR ButtonBattery Batter3InstalLationBuon Number ButtonsPLAYButton Stop Button ButtonDisplay prompts you to select AM or 121Turn on Press Making a RecordingPlaying It Back Operating NotesLEt StOO,UE¢ Jacks Back ADD/ERASE or Tracking ButtonsAppear TurnedTracking Control Pause During RecordingPause for Stop-Action Playback =Picture SearchOn-Screen Display Press Program on the remote hand unit You can proam the timer to do the-- followingSimplified Programming Instructions Turn on VCRDisplay will show Start Date Clearing a Timer ProgramFollowed by the current or next date and day Timer Recording From the Line Input Stopping a Timer Recording in ProessStep Cassette Care and Storage Recording SpeedReading Quick 7onent Recording Tion Recording Viewing the Same Program On when you RecordNormal Viewing Recording With OffBasic Playback Select Desired tape Indicator will light SpeedMake sure indicator is on Recording and Viewing Different ProgramsDub Tapes Simplified Operating InstructionsLight Will YounormallyusePress during Playback to display Press to recordPlay, Record, Rewind, Turns the Tape CounterIModer Press again to release pause Press to turn off VCR Used when setting the clock and programming the timerPlaces VCR in Pause mode when Timer. Also resets tape counterDusting attachment of ,our \acuum cleaner CleaningTransformers ConnectorsAdapters Number SpecialPLA Y Button Time Timer ProgrammingTimer ArrangementsMarcas Registraclas Job A-58530 E72t Thomson Consumer Electronics, IncPart Number 2826