The programmable clock/timer permits unattended
recording of up to four different TV programs. The hmer is actually a small computer which will turn on the VCR at the time you select, record for a selected length
of time. and then turn off the VCR... all automatically without you being there.
-You can pro_am the timer to do the-- following:
•Record a program on a single day up to one year away. [NORMAL PROGRAM}
•Record a program at the same time Monday through Friday. [DALLY PROGRAM]
•Record a program on one certain day of every v_'eek. [WEEKLY PROGRAM}
-Things to know before you start:
•You can program the timer up to one year before the TV program is to be recorded.
•You can correct an error in the program any time before the last step by pressing the CLEAR button
on the remote control repeatedly until the digit to be corrected is flashing. Then enter the correct
digit and continue the programming sequence.
Simplified Programming Instructions
1.Turn on VCR.
2.Turn on TV and tune it to the VCR channel (channel 3 or 4_.
3.Press PROGRAM on remote hand umt_
4.Watch the display on the TV
prompt you Lbrough the rest of the programnung exercise.
5.Insert a cassette tape with its safety tab intact. (Rewind the tape if necessary.)
6.Turn off the VCIL
Turn on your VCR and TV. Tune the TV to
the VCR channel (channel 3 or 4) so you'll |
|
|
| |||||||||
i] be | able | to | see | the programming | display | on |
|
|
| |||
the | TV | screen. |
|
|
|
|
|
|
|
| ||
Make | sure |
| the | VCR's | clock | is set | to | the | TO | SELECT | MODE | |
| PVSH _UM_ER | SHOC_N | ||||||||||
correct | time. | The timer | cannot | record | at | the | i I | CLOCK $_r | ||||
right time | if the | clock is set incorrectly. | Reset | 2 | _ORM&L | PAOGRAM | ||||||
3 | p_RA_ | |||||||||||
the | clock if | necessary. |
|
|
|
| 4 | W[_Ly | e_OGR_M | |||
|
|
|
| 5 | P_0_AAM | REVIE_ | ||||||
Press PROGRAM on the remote hand unit. | TO END PffS_ PROGRAM |
| |
The programming "'menu" appears on the |
|
TV screen. |
|
Press "2" to enter a Normal Program. "3" to enter a Daily Program. or "4" to enter a Weekly Program.
The display will prompt you to select a Program Number.
_] Four program numbers are available and you can enter different programming instructions
m each one. All four program numbers will be flashing because none of them have been used. If the timer has been programmed, the number that was used will stay on instead of flash. You must clear a program number before the same number can be used again. See "Clearing a Timer Program" on the next page.
[31 The display will prompt you to select a channel number.
41 The display will prompt you to enter the
recording start time.
NO_._LPROOR*M4'
$[L[CT PROG NL_MEER
TO EN_ PUS_ PRO_A_
_0_¥AL eMOG_AM ,
TFME O_ ....
C_ 0d
$T_R_ DATE - ¢__/__
TO _NO _U$_ _OG_A_
Press a digit from ] to 4 on the remote to select the program number you want to program.
Press two digits for the channel to be recorded (for example, press 0 then 4 for channel 41.
Press four digits, two for the hour and two more for the minute. For example, press 0 6 0 0 for 6:00. (Always press "0" before a single- digit hour or minute.)
22