Pioneer DVR-310, DVR-330-S, DVR-7000 manual Basic playback, Nicam a Nicam B

Getting started 04

•If the NICAM broadcast is bilingual, you can also select the language.

NICAM A NICAM B

Regular NICAM A+B

•You can also select the language for a non-NICAM bilingual broadcast.

A (L) B (R)

A + B (L+R)

•When watching a recording made from an external input with Bilingual recording selected (see External Audio on page 70), you can switch the audio channel between left (L), right (R) or both (L+R).

L R

L+R

Tip

•When recording in Video mode, or on the LPCM setting, only one channel of a bilingual broadcast is recorded. In this case, decide which language you want to record before recording by setting the Bilingual Recording setting (see Bilingual Recording on page 70).

Basic playback

This section shows you how to use your recorder for playback of discs (DVD, CD, etc.). More playback features, such as repeat and program play, are covered in Playback on page 46.

Important

•Throughout this manual, the term ‘DVD’ means playback-only DVD-Video discs and DVD-R/RW. If a function is specific to a particular kind of DVD disc, it is specified.

•Some DVD-Video discs don’t allow certain playback controls to operate at certain points in the disc. This is not a malfunction.

STANDBY/ON OPEN/CLOSE

ENTER

PLAY

STOP

1 Press STANDBY/ON to switch on.

Also turn on your TV and make sure that it is set to the correct video input.

2 Press OPEN/CLOSE to open the disc tray.

3 Load a disc.

Load a disc with the label side facing up, using the disc tray guide to align the disc (if you’re loading a double- sided DVD-Video disc, load it with the side you want to play face down).

•If you want to play a DTS audio CD, please first read the note on page 28.

4 Press PLAY to start playback.

•If you’re playing a DVD-Video or Video CD, a disc menu may appear when you start playback. Use the

buttons and ENTER to navigate DVD disc menus, and the number buttons and ENTER for Video CD menus.

•See the following sections for more details on playing specific kinds of discs.

5 To stop playback, press STOP.

6When you’ve finished using the recorder, eject the disc and switch the recorder back into standby.

• To open/close the disc tray, press OPEN/CLOSE. Remove the disc before putting the recorder into standby.

•Press STANDBY/ON to switch the recorder into standby.

27

En