Pioneer DVR-7000, DVR-310, DVR-330-S manual Switching audio channels, Switching camera angles

Page 53

Playback

06

Press AUDIO repeatedly to select an audio soundtrack.

Audio : 1/2

Dolby Digital 2/0CH

 

 

The sound may drop out for a few seconds when switching soundtracks.

Some discs feature both Dolby Digital and DTS soundtracks. There is no analog audio output when DTS is selected. To listen to the DTS soundtrack, connect this recorder to a DTS decoder or AV amp/ receiver with built-in DTS decoder via the digital output. See Connecting to an AV amplifier or receiver on page 17 for connection details.

Switching audio channels

VR mode

CD

Video CD

Super VCD

WMA/MP3

For VR mode content recorded with bilingual audio, you can switch between left (L) channel, right (R) channel, or

both (L+R).1

When playing Video CDs and audio CDs you can switch between stereo, just the left channel or just the right channel.

Some Super VCDs have two soundtracks. With these discs you can switch between the two soundtracks as well as individual channels in each.

AUDIO

1To display/switch the audio channel, press AUDIO repeatedly.

The audio channel(s) currently playing are indicated on- screen.

VR mode

CD

Video CD

WMA/MP3

Stereo – Stereo (default)

1/L – Left channel only

2/R – Right channel only

Super VCD

1 Stereo – Soundtrack 1 / Stereo (default)

1 L – Soundtrack 1 / Left channel

1 R – Soundtrack 1 / Right channel

2 Stereo – Soundtrack 2 / Stereo

2 L – Soundtrack 2 / Left channel

2 R – Soundtrack 2 / Right channel

Switching camera angles

DVD-Video

Some DVD-Video discs feature scenes shot from two or more angles—check the disc box for details: it should be

marked with a icon if it contains multi-angle scenes. When a multi-angle scene is playing, the same icon appears on screen to let you know that other angles are available (this can be switched off if you prefer—see Angle Indicator on page 73).

AUDIOANGLE

MENU

TOP MENU

To switch the camera angle, press ANGLE.

The angle number is displayed on-screen.

If the disc was paused, playback starts again with the new angle.

Repeat play is canceled if you change the angle while repeat playback is active.

You can also change the angle from some DVD-Video disc menus. Press TOP MENU or MENU to access.

L+R – Both channels (default)

L – Left channel only

R – Right channel only

Note

1.When playing a Bilingual recording on a VR mode disc, if you are listening to the Dolby Digital soundtrack via the digital output, you cannot switch the audio channel. Set Dolby Digital Out to Dolby Digital PCM (see Dolby Digital Out on page 70) or listen via the analog outputs if you need to switch the audio channel.

53

En

Image 53
Contents DVR-330-S Risk of Electric Shock Do not Open Ventilation Caution Operating EnvironmentContents Setting up the remote to control your TV Resetting the recorderAdditional information IndexBefore you start Chapter FeaturesBefore you start Before you start Play Video mode recordings on a regular DVD PlayerRecord from a DV camcorder Safe, non-destructive editingBefore you start What’s in the box Putting the batteries in the remote controlUsing the remote control DVD-R/RW compatibility General disc compatibilityCD-R/RW compatibility Compressed audio compatibilityPC-created disc compatibility WMA Windows Media Audio compatibilityJpeg file compatibility Original Connecting up Chapter Connecting upRear panel connections Front panel connectionsConnecting up Easy connections Connecting using the component video output Connecting up Using other types of video outputConnecting using an S-video output This enables you to watch the output from this recorder This enables you to watch and record TV channelsThis enables you to record scrambled TV channels Connect RF antenna cables as shownThis enables you to watch discs This enables you to listen to multichannel surround sound.1 Connecting up Connecting to an AV amplifier or receiverAfter checking all the connections, plug in the recorder Connecting up Connecting other AV sourcesPlugging Front panel Controls and displaysControls and displays Chapter Return Controls and displays Remote controlControls and displays Ntsc Controls and displays DisplayLP / SLP EP / SEPGetting started Chapter Switching on and setting upGetting started Auto clock setting Auto-tuning channelsManual clock setting Getting startedMaking your first recording Other settings you can makeSelect the TV screen type, ‘Wide 169’ or ‘Standard 43’ Is your TV compatible with progressive scan video?Playing back your recording Using the built-in TV tunerChanging TV channels Changing audio channelsNicam a Nicam B Basic playbackPlaying CDs and WMA/MP3 discs Playing DVD discsPlaying Video CD/Super VCDs Using the Home MenuHome Menu Home menu optionsPlay display Getting started Displaying disc information on- screenStop display Recording mode Copy protected material ! / PureCinema indicator #Recording display Remaining recording time availableRecording Chapter RecordingAbout DVD recording Recording time and picture qualityPress REC Mode repeatedly to select a recording setting Setting the picture quality/recording timeRecording Recorded audio Restrictions on video recordingRecording Basic recording from the TV Setting a timer recordingRecording Easy Timer RecordingCurrent time Recording start time Timer recording using the G-Code programming systemPress Enter to set the start time Press Enter to set the end timeCode programming with the power off Setting a manual timer recordingEnter the timer recording settings If there are more than five timer programs alreadyTo exit the timer recording screen, press Home Menu Tip This area you can setExtending a timer recording in progress Editing a timer programDeleting a timer program Skipping a regular timer programCanceling and stopping a timer recording in progress Timer recording FAQRecorder won’t let me enter a timer program! Why not? What happens when two or more timer programs overlap?Recording from an external component See Connecting up for connection optionsPress REC when you’re ready to start recording Set up the recorderSee Audio In Settings on page 69 for more on these settings Automatic recording from a satellite tunerPress Home Menu and select ‘DV Record’ from the menu Also, set the camcorder to VTR modeUse Press EnterFinalizing a disc Playing your recordings on other DVD playersCan’t get my DV camcorder to work with the recorder There’s a picture, but no soundIt takes about 30 seconds to initialize the disc Press Home Menu and select ‘Disc Setup’ Select ‘Initialize’Initializing a recordable DVD disc Playback Chapter PlaybackIntroduction Navigating discsPlayback Using the Disc Navigator to browse the contents of a discScanning discs Using the Disc Navigator with playback-only discsScan Scan 1 ScanPlay Mode Play Mode menuPlayback Playing in slow motion Frame advance/frame reverseRepeat Search ModeRepeat play Title/Chapter/Folder/Track Search For example, for trackRepeat to build up a program list Program playSwitching DVD soundtracks Displaying and switching subtitlesOther Program play functions ClearSwitching camera angles Switching audio channelsTo display/switch the audio channel, press Audio repeatedly To switch the camera angle, press AngleEditing Chapter EditingDisc Navigator screen To exit the Disc Navigator, press Home MenuVideo mode VR mode Original Play List Editing Command menu panel optionsCreate PlayEditing Using the remote key shortcuts to input a nameErase Title NameKey Characters Set ThumbnailErase Section Lock DivideChapter Edit Select ‘Edit’ ‘Combine’ from the command menu panel Select ‘Edit’ ‘Lock’ from the command menu panelMove CombineCan’t edit my disc Select ‘Undo’ from the command menu panelUndo Playing a slideshow PhotoViewerPhotoViewer Chapter Reloading files from a disc PhotoViewerZooming the image Rotating an imageDisc Setup menu Chapter Disc Setup menuBasic settings Input Disc NameFinalize settings1 Disc Setup menu Initialize settingsFinalize Undo FinalizeVideo/Audio Adjust menu Chapter Video/Audio Adjust menuSetting the picture quality for TV and external inputs Choosing a presetSetting the picture quality for disc playback Video/Audio Adjust menuSelect the picture quality setting you want to adjust Built-in TV tuner‘Max’ Audio DRCInitial Setup menu Chapter Initial Setup menuUsing the Initial Setup menu Setting Options ExplanationInitial Setup menu Mpeg PCM MpegOther Audio Language EnglishAuto Language DVD Menu Language w/Subtitle LanguageOptimized Rec Recording Settings Manual Recording On go to setupPresentation for widescreen material Pan & ScanChange Password Parental Lock Set PasswordRemote Control Mode Recorder Change LevelSelecting other languages for language options Additional information about the TV system settingsAdditional information about component video output Setting up the remote to control your Resetting the recorderUsing the TV remote control buttons Additional informationAdditional information Screen sizes and disc formats When viewing on a standard TV or monitorWhen viewing on a widescreen TV or monitor General Additional information TroubleshootingProblem Remedy Additional information Can I play a VR mode DVD-RW disc in another DVD player? Frequently asked questionsWhat kind of discs can I use for recording? See also Cprm on Can I play a disc while recording?DV-related messages Additional information About DVAdditional information Manual recording modes VR mode DVD Video mode DVD Resolution LevelCountry/Area code list Additional information Language code listLanguage Language code letter, Language code Country/Area, Country/Area code, Code letterMessage Explanation/Action Handling discs Cleaning the pickup lensCondensation Storing discsMoving the recorder Additional information Hints on installationGlossary Mpeg audio DRM Digital Rights ManagementMpeg video Optical digital outputSampling frequency Regions DVD-Video onlyTitle TrackTimer Additional information SpecificationsTuner DVD-R/DVD-RWLINK/IEEE 1394 standard Supplied accessoriesInput/Output Language audio 52, 71 code list 82 DVD menu Connecting 12, 18 error messages 80 recording fromIndex Maximum number per title/disc 32 CprmPage VRB1377-A Pioneer Corporation
Related manuals
Manual 100 pages 38.64 Kb

DVR-330-S, DVR-310, DVR-7000 specifications

The Pioneer DVR-7000, DVR-310, and DVR-330-S are remarkable devices in the realm of digital video recording technology. Each of these models presents its unique features, embodying the innovation and quality synonymous with the Pioneer brand.

The Pioneer DVR-7000 is a versatile and robust digital video recorder that has been well-regarded for its exceptional recording capabilities and user-friendly operation. One of its standout features is its ability to record in MPEG-2 format, ensuring high-quality video playback. The device supports both DVD-R and DVD-RW formats, allowing users to create, edit, and finalize their recordings with ease. With a built-in 80GB hard drive, the DVR-7000 offers significant storage space for users to save their favorite content. The intuitive interface makes it simple to navigate through recorded programs, set timers for future recordings, and access various playback options.

Moving to the DVR-310, this model focuses on providing a reliable user experience with enhanced recording and editing features. It supports progressive scan output, providing sharper images and better detail during playback. The DVR-310 also includes a one-touch recording feature, which simplifies the process of capturing shows. Compatible with DVD-R, DVD-RW, and DVD+RW formats, users can enjoy flexibility in the types of media they choose. Its versatile connectivity options, including HDMI output, allow for easy integration into any home theater setup.

The Pioneer DVR-330-S, designed with a sleek aesthetic, combines functionality with cutting-edge technology. Featuring an integrated tuner, it allows users to record and watch live TV without the need for an external device. The DVR-330-S supports dual-layer DVDs, which effectively doubles the storage capacity compared to standard DVDs—ideal for long recordings or high-definition content. One of its key innovations is the Time Slip feature, which lets viewers pause live TV and resume playback seamlessly. In addition, it boasts advanced editing features that enable users to trim and merge recordings effortlessly.

Collectively, the Pioneer DVR-7000, DVR-310, and DVR-330-S showcase the brand's commitment to quality, usability, and technological advancement in home entertainment. With their various capabilities, they cater to a wide range of user preferences, whether for basic recording needs or more sophisticated editing functionalities. These models have solidified Pioneer’s reputation as a leader in digital recording solutions, ensuring that entertainment remains an enjoyable experience for all users.