Pioneer DVR-7000 Video/Audio Adjust menu Chapter, Choosing a preset, Creating your own set

The Video/Audio Adjust menu 10

Chapter 10

The Video/Audio Adjust menu

Using the Video/Audio Adjust menu you can set up the picture quality for the built-in tuner and external inputs, for disc playback, and for recording.

4 Press ENTER to select the preset.

Setting the picture quality for TV and external inputs

Picture Creation lets you choose a set of picture quality settings for the built-in TV tuner and for each external input. There are several preset settings that suit various sources, or you can create up to three of your own sets.

Choosing a preset

1With the recorder stopped, press HOME MENU and select ‘Video/Audio Adjust’.

Disc Navigator Disc Setup

Creating your own set

There are three user presets in which you can save your own set of picture quality settings.

1Follow Choosing a preset above and select one of the user presets (Memory 1, 2 or 3).

2Select ‘Detailed Settings’.

	Pr 1
	Memory1
	Detailed Settings
3 Use the	buttons to select the picture quality

setting you want to adjust.

Timer Recording	Initial Setup
Play Mode	Video/Audio Adjust
DV Record	Photo Viewer

2 Select ‘Video Adjust’.

3 Use the buttons to change the preset.

Memory1
Prog. Motion	Motion
PureCinma		Auto
3D-Y/C	Motion
YNR	Off
CNR	Off
Detail	Min
White AGC		Off

Pr 1

Still

Still

Max

Max

Max

Pr 1

Tuner

Detailed Settings

•Use the INPUT SELECT button to switch between the built-in TV tuner and the external inputs.

•Use the CH +/– buttons to change the channel of the built-in TV tuner.

There are six presets available:

•Tuner – suitable for general TV broadcasts

•VCR – suitable for video cassettes

•LDP – suitable for Laserdiscs

•Memory1 – user preset 1

•Memory2 – user preset 2

•Memory3 – user preset 3

You can press DISPLAY to see the individual settings for the current preset (Tuner, VCR or LDP).

You can adjust the following settings:1

•Prog. Motion – Adjusts the motion and still picture quality when video output is set to progressive.

•PureCinema – This setting optimizes the picture for film material when the video output is set to progressive. Usually this is best left set to Auto; try switching to Off if the picture appears unnatural.

•3-D Y/C – Adjusts the brightness/color separation (NTSC video only).

•YNR – Adjusts the amount of noise reduction (NR) applied to the Y (brightness) component.

•CNR – Adjusts the amount of noise reduction (NR) applied to the C (color) component.

•Detail – Adjusts how sharp edges appear.

•White AGC – Turn on for automatic white level adjustment.2

Note

1.When the DV input is selected, only Prog. Motion and PureCinema settings can be adjusted. 2.When White AGC is On, the White Level setting can’t be adjusted.

65

En