Pioneer DVR-330-S, DVR-310, DVR-7000 manual Playing DVD discs, Playing CDs and WMA/MP3 discs

Page 28

04Getting started

Playing DVD discs

The table below shows the basic playback controls for DVD-Video, and recordable DVD discs.

PLAY Press to start playback.

If RESUME is displayed on-screen, play- back starts from the place last stopped.

STOP Press to stop playback.

You can resume playback from the same point by pressing PLAY. (Press STOP again to cancel the resume function.)

PAUSE Pauses playback, or restarts playback

when paused.

REV SCAN FWD SCAN Press to start scanning. Press repeatedly to increase the scanning speed.

 

 

 

Press to skip to previous/next chapter/title.

 

 

PREV

NEXT

 

 

 

 

(During playback you can also use the

 

 

 

 

 

 

 

 

front panel +/– buttons.)

 

 

 

 

 

 

 

 

 

Except VR mode: During playback, enter a

 

 

 

 

 

 

 

 

chapter number then press ENTER to skip

 

 

 

 

directly to that chapter within the currently

 

 

 

CLEAR

playing title.

 

 

 

On some discs, you can also use the num-

 

 

 

CLEAR

 

 

 

 

ber buttons to select numbered items in

 

 

 

 

 

 

 

 

 

 

 

ENTER

the disc menu.

 

 

 

 

VR mode only: During playback, enter a

 

 

 

 

title number then press ENTER.

 

 

 

 

All: Press CLEAR to clear a number entry

 

 

 

 

and start again.

BACK CM SKIP (Commercial back/skip) Each press skips backward/forward progressively up to a

maximum of ten minutes forward or three minutes back.

Playing CDs and WMA/MP3 discs

The table below shows the basic playback controls for audio CDs1, and WMA/MP3 files.

PLAY Press to start playback.

STOP Press to stop playback.

PAUSE Pauses playback, or restarts playback

when paused.

REV SCAN FWD SCAN Press to start scanning. Press again to increase the scanning speed. (There are two scan speeds; the current scan speed is shown on-screen.)

PREV NEXT Press to skip to previous/next track (or folder for WMA/MP3 disc). (During play- back you can also use the front panel +/– buttons.)

During playback, enter a track number then press ENTER to skip directly to that track.

Press CLEAR to clear a number entry and

CLEAR

CLEAR

start again.

ENTER

 

STEP/SLOW During playback, press to start slow- motion playback. Press repeatedly to change the playback speed.

While paused, press to advance a single frame in either direction.

Press to display the menu of a DVD-Video

TOP MENU MENU disc.

ENTER

Use the cursor buttons to navigate DVD- Video disc menus; press ENTER to select items.

RETURN Press to return to the previous level of a

DVD-Video disc menu.

Note

1.If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amp/receiver with a digital connection. Noise will be output through the analog outputs. Also make sure that STEREO is selected using the AUDIO button (see Switching audio channels on page 53).

28

En

Page 27 Page 29
Image 28
Page 27 Page 29
Contents DVR-330-S Risk of Electric Shock Do not Open Operating Environment Ventilation CautionContents Resetting the recorder Setting up the remote to control your TVAdditional information IndexBefore you start FeaturesBefore you start Chapter Play Video mode recordings on a regular DVD Player Before you startRecord from a DV camcorder Safe, non-destructive editingUsing the remote control Putting the batteries in the remote controlBefore you start What’s in the box General disc compatibility DVD-R/RW compatibilityCD-R/RW compatibility Compressed audio compatibilityJpeg file compatibility WMA Windows Media Audio compatibilityPC-created disc compatibility Original Connecting up Connecting up ChapterRear panel connections Front panel connectionsConnecting up Easy connections Connecting using an S-video output Connecting up Using other types of video outputConnecting using the component video output This enables you to watch and record TV channels This enables you to watch the output from this recorderThis enables you to record scrambled TV channels Connect RF antenna cables as shownThis enables you to watch discs Connecting up Connecting to an AV amplifier or receiver This enables you to listen to multichannel surround sound.1Plugging Connecting up Connecting other AV sourcesAfter checking all the connections, plug in the recorder Controls and displays Chapter Controls and displaysFront panel Controls and displays Remote control ReturnControls and displays Controls and displays Display NtscLP / SLP EP / SEPGetting started Switching on and setting upGetting started Chapter Auto-tuning channels Auto clock settingManual clock setting Getting startedOther settings you can make Making your first recordingSelect the TV screen type, ‘Wide 169’ or ‘Standard 43’ Is your TV compatible with progressive scan video?Using the built-in TV tuner Playing back your recordingChanging TV channels Changing audio channelsBasic playback Nicam a Nicam BPlaying DVD discs Playing CDs and WMA/MP3 discsUsing the Home Menu Playing Video CD/Super VCDsHome Menu Home menu optionsStop display Getting started Displaying disc information on- screenPlay display Copy protected material ! / PureCinema indicator # Recording modeRecording display Remaining recording time availableRecording Recording ChapterAbout DVD recording Recording time and picture qualitySetting the picture quality/recording time Press REC Mode repeatedly to select a recording settingRecording Recorded audio Restrictions on video recordingSetting a timer recording Recording Basic recording from the TVEasy Timer Recording RecordingTimer recording using the G-Code programming system Current time Recording start timePress Enter to set the start time Press Enter to set the end timeSetting a manual timer recording Code programming with the power offIf there are more than five timer programs already Enter the timer recording settingsTo exit the timer recording screen, press Home Menu Tip This area you can setEditing a timer program Extending a timer recording in progressDeleting a timer program Skipping a regular timer programTimer recording FAQ Canceling and stopping a timer recording in progressRecorder won’t let me enter a timer program! Why not? What happens when two or more timer programs overlap?See Connecting up for connection options Recording from an external componentSet up the recorder Press REC when you’re ready to start recordingSee Audio In Settings on page 69 for more on these settings Automatic recording from a satellite tunerAlso, set the camcorder to VTR mode Press Home Menu and select ‘DV Record’ from the menuUse Press EnterPlaying your recordings on other DVD players Finalizing a discCan’t get my DV camcorder to work with the recorder There’s a picture, but no soundInitializing a recordable DVD disc Press Home Menu and select ‘Disc Setup’ Select ‘Initialize’It takes about 30 seconds to initialize the disc Playback Playback ChapterIntroduction Navigating discsUsing the Disc Navigator to browse the contents of a disc PlaybackUsing the Disc Navigator with playback-only discs Scanning discsScan Scan 1 ScanPlay Mode menu Play ModePlayback Playing in slow motion Frame advance/frame reverseSearch Mode RepeatRepeat play Title/Chapter/Folder/Track Search For example, for trackProgram play Repeat to build up a program listDisplaying and switching subtitles Switching DVD soundtracksOther Program play functions ClearSwitching audio channels Switching camera anglesTo display/switch the audio channel, press Audio repeatedly To switch the camera angle, press AngleEditing Editing ChapterDisc Navigator screen To exit the Disc Navigator, press Home MenuEditing Command menu panel options Video mode VR mode Original Play ListCreate PlayUsing the remote key shortcuts to input a name EditingErase Title NameErase Section Set ThumbnailKey Characters Chapter Edit DivideLock Select ‘Edit’ ‘Lock’ from the command menu panel Select ‘Edit’ ‘Combine’ from the command menu panelMove CombineUndo Select ‘Undo’ from the command menu panelCan’t edit my disc PhotoViewer Chapter PhotoViewerPlaying a slideshow PhotoViewer Reloading files from a discZooming the image Rotating an imageDisc Setup menu Disc Setup menu ChapterBasic settings Input Disc NameDisc Setup menu Initialize settings Finalize settings1Finalize Undo FinalizeVideo/Audio Adjust menu Video/Audio Adjust menu ChapterSetting the picture quality for TV and external inputs Choosing a presetVideo/Audio Adjust menu Setting the picture quality for disc playbackSelect the picture quality setting you want to adjust Built-in TV tunerAudio DRC ‘Max’Initial Setup menu Initial Setup menu ChapterUsing the Initial Setup menu Setting Options ExplanationInitial Setup menu Mpeg Mpeg PCMAudio Language English OtherAuto Language DVD Menu Language w/Subtitle LanguageRecording Settings Manual Recording On go to setup Optimized RecPresentation for widescreen material Pan & ScanParental Lock Set Password Change PasswordRemote Control Mode Recorder Change LevelAdditional information about component video output Additional information about the TV system settingsSelecting other languages for language options Resetting the recorder Setting up the remote to control yourUsing the TV remote control buttons Additional informationWhen viewing on a widescreen TV or monitor When viewing on a standard TV or monitorAdditional information Screen sizes and disc formats Problem Remedy Additional information TroubleshootingGeneral Additional information Frequently asked questions Can I play a VR mode DVD-RW disc in another DVD player?What kind of discs can I use for recording? See also Cprm on Can I play a disc while recording?Additional information About DV DV-related messagesVR mode DVD Video mode DVD Resolution Level Additional information Manual recording modesAdditional information Language code list Country/Area code listLanguage Language code letter, Language code Country/Area, Country/Area code, Code letterMessage Explanation/Action Cleaning the pickup lens Handling discsCondensation Storing discsGlossary Additional information Hints on installationMoving the recorder DRM Digital Rights Management Mpeg audioMpeg video Optical digital outputRegions DVD-Video only Sampling frequencyTitle TrackAdditional information Specifications TimerTuner DVD-R/DVD-RWInput/Output Supplied accessoriesLINK/IEEE 1394 standard Connecting 12, 18 error messages 80 recording from Language audio 52, 71 code list 82 DVD menuIndex Maximum number per title/disc 32 CprmPage Pioneer Corporation VRB1377-A
Related manuals
Manual 100 pages 38.64 Kb

DVR-330-S, DVR-310, DVR-7000 specifications

The Pioneer DVR-7000, DVR-310, and DVR-330-S are remarkable devices in the realm of digital video recording technology. Each of these models presents its unique features, embodying the innovation and quality synonymous with the Pioneer brand.

The Pioneer DVR-7000 is a versatile and robust digital video recorder that has been well-regarded for its exceptional recording capabilities and user-friendly operation. One of its standout features is its ability to record in MPEG-2 format, ensuring high-quality video playback. The device supports both DVD-R and DVD-RW formats, allowing users to create, edit, and finalize their recordings with ease. With a built-in 80GB hard drive, the DVR-7000 offers significant storage space for users to save their favorite content. The intuitive interface makes it simple to navigate through recorded programs, set timers for future recordings, and access various playback options.

Moving to the DVR-310, this model focuses on providing a reliable user experience with enhanced recording and editing features. It supports progressive scan output, providing sharper images and better detail during playback. The DVR-310 also includes a one-touch recording feature, which simplifies the process of capturing shows. Compatible with DVD-R, DVD-RW, and DVD+RW formats, users can enjoy flexibility in the types of media they choose. Its versatile connectivity options, including HDMI output, allow for easy integration into any home theater setup.

The Pioneer DVR-330-S, designed with a sleek aesthetic, combines functionality with cutting-edge technology. Featuring an integrated tuner, it allows users to record and watch live TV without the need for an external device. The DVR-330-S supports dual-layer DVDs, which effectively doubles the storage capacity compared to standard DVDs—ideal for long recordings or high-definition content. One of its key innovations is the Time Slip feature, which lets viewers pause live TV and resume playback seamlessly. In addition, it boasts advanced editing features that enable users to trim and merge recordings effortlessly.

Collectively, the Pioneer DVR-7000, DVR-310, and DVR-330-S showcase the brand's commitment to quality, usability, and technological advancement in home entertainment. With their various capabilities, they cater to a wide range of user preferences, whether for basic recording needs or more sophisticated editing functionalities. These models have solidified Pioneer’s reputation as a leader in digital recording solutions, ensuring that entertainment remains an enjoyable experience for all users.
Top Page Image Contents