Pioneer DVR-7000, DVR-310, DVR-330-S manual Additional information About DV, DV-related messages

Page 80

12Additional information

About DV

Using DV, also known as i.LINK, you can connect a DV- equipped camcorder to this recorder using a single DV cable for input of audio, video, data and control signals.

The i.LINK interface is also known as IEEE 1394-1995. “i.LINK” and the “i.LINK” logo are trademarks.

•This recorder is only compatible with DV-format (DVC-SD) camcorders. Digital satellite receivers and Digital VHS video recorders are not compatible.

•You cannot connect more than one DV camcorder at a time to this recorder.

•You cannot control this recorder from external equipment connected via the DV IN jack.

•It may not always be possible to control the connected camcorder via the DV IN jack.

•Digital camcorders can usually record audio as stereo 16-bit/48kHz, or twin stereo tracks of 12-bit/ 32kHz. This recorder can only record one stereo audio track. Set the DV Input setting as required (see DV Input on page 70).

•Audio input to the DV IN jack should be 32 or 48kHz (not 44.1kHz).

•Picture disturbance in the recording may occur if the source component pauses playback or plays an unrecorded section of tape, or if the power fails in the source component, or the DV cable becomes disconnected.

•The DV IN jack is an input only. There is no output functionality.

DV-related messages

You may see the following messages appear on your TV screen when using the DV IN jack.

•No DV camcorder connected. – The camcorder is not connected properly, or the camcorder is switched off.

•The DV camcorder is recording. – The camcorder is recording, so you cannot start recording from the camcorder to this recorder.

•You cannot connect more than one DV camcorder at the same time. – The DV jack on this recorder supports connection to just one camcorder.

•No tape in the DV camcorder. – There is no cassette loaded into the connected equipment.

•The DV camcorder is in record-pause mode. – The camcorder is in record-pause mode.

•DV camcorder playback canceled. Recording has been paused. – Recording was paused because the camcorder is not in playback mode.

•Cannot operate the DV camcorder. – This recorder cannot control the camcorder. Try switching off the camcorder then switching it back on.

•Could not operate the DV camcorder. – This recorder was not able to control the camcorder.

•Recording has stopped because the recorded material on the tape finished. – When the recorded part of the DV tape comes to an end, this recorder automatically stops recording.

•Recording has stopped because DV camcorder playback stopped. – Recording stopped because DV camcorder playback was stopped or the camcorder was disconnected.

•The DV camcorder is not set for playback. Please select playback mode on the DV camcorder. – The camcorder is in camera mode.

80

En

Page 79 Page 81
Image 80
Page 79 Page 81
Contents DVR-330-S Risk of Electric Shock Do not Open Operating Environment Ventilation CautionContents Resetting the recorder Setting up the remote to control your TVAdditional information IndexBefore you start Chapter FeaturesBefore you start Play Video mode recordings on a regular DVD Player Before you startRecord from a DV camcorder Safe, non-destructive editingBefore you start What’s in the box Putting the batteries in the remote controlUsing the remote control General disc compatibility DVD-R/RW compatibilityCD-R/RW compatibility Compressed audio compatibilityPC-created disc compatibility WMA Windows Media Audio compatibilityJpeg file compatibility Original Connecting up Connecting up ChapterRear panel connections Front panel connectionsConnecting up Easy connections Connecting using the component video output Connecting up Using other types of video outputConnecting using an S-video output This enables you to watch and record TV channels This enables you to watch the output from this recorderThis enables you to record scrambled TV channels Connect RF antenna cables as shownThis enables you to watch discs Connecting up Connecting to an AV amplifier or receiver This enables you to listen to multichannel surround sound.1After checking all the connections, plug in the recorder Connecting up Connecting other AV sourcesPlugging Front panel Controls and displaysControls and displays Chapter Controls and displays Remote control ReturnControls and displays Controls and displays Display NtscLP / SLP EP / SEPGetting started Chapter Switching on and setting upGetting started Auto-tuning channels Auto clock settingManual clock setting Getting startedOther settings you can make Making your first recordingSelect the TV screen type, ‘Wide 169’ or ‘Standard 43’ Is your TV compatible with progressive scan video?Using the built-in TV tuner Playing back your recordingChanging TV channels Changing audio channelsBasic playback Nicam a Nicam BPlaying DVD discs Playing CDs and WMA/MP3 discsUsing the Home Menu Playing Video CD/Super VCDsHome Menu Home menu optionsPlay display Getting started Displaying disc information on- screenStop display Copy protected material ! / PureCinema indicator # Recording modeRecording display Remaining recording time availableRecording Recording ChapterAbout DVD recording Recording time and picture qualitySetting the picture quality/recording time Press REC Mode repeatedly to select a recording settingRecording Recorded audio Restrictions on video recordingSetting a timer recording Recording Basic recording from the TVEasy Timer Recording RecordingTimer recording using the G-Code programming system Current time Recording start timePress Enter to set the start time Press Enter to set the end timeSetting a manual timer recording Code programming with the power offIf there are more than five timer programs already Enter the timer recording settingsTo exit the timer recording screen, press Home Menu Tip This area you can setEditing a timer program Extending a timer recording in progressDeleting a timer program Skipping a regular timer programTimer recording FAQ Canceling and stopping a timer recording in progressRecorder won’t let me enter a timer program! Why not? What happens when two or more timer programs overlap?See Connecting up for connection options Recording from an external componentSet up the recorder Press REC when you’re ready to start recordingSee Audio In Settings on page 69 for more on these settings Automatic recording from a satellite tunerAlso, set the camcorder to VTR mode Press Home Menu and select ‘DV Record’ from the menuUse Press EnterPlaying your recordings on other DVD players Finalizing a discCan’t get my DV camcorder to work with the recorder There’s a picture, but no soundIt takes about 30 seconds to initialize the disc Press Home Menu and select ‘Disc Setup’ Select ‘Initialize’Initializing a recordable DVD disc Playback Playback ChapterIntroduction Navigating discsUsing the Disc Navigator to browse the contents of a disc PlaybackUsing the Disc Navigator with playback-only discs Scanning discsScan Scan 1 ScanPlay Mode menu Play ModePlayback Playing in slow motion Frame advance/frame reverseSearch Mode RepeatRepeat play Title/Chapter/Folder/Track Search For example, for trackProgram play Repeat to build up a program listDisplaying and switching subtitles Switching DVD soundtracksOther Program play functions ClearSwitching audio channels Switching camera anglesTo display/switch the audio channel, press Audio repeatedly To switch the camera angle, press AngleEditing Editing ChapterDisc Navigator screen To exit the Disc Navigator, press Home MenuEditing Command menu panel options Video mode VR mode Original Play ListCreate PlayUsing the remote key shortcuts to input a name EditingErase Title NameKey Characters Set ThumbnailErase Section Lock DivideChapter Edit Select ‘Edit’ ‘Lock’ from the command menu panel Select ‘Edit’ ‘Combine’ from the command menu panelMove CombineCan’t edit my disc Select ‘Undo’ from the command menu panelUndo Playing a slideshow PhotoViewerPhotoViewer Chapter PhotoViewer Reloading files from a discZooming the image Rotating an imageDisc Setup menu Disc Setup menu ChapterBasic settings Input Disc NameDisc Setup menu Initialize settings Finalize settings1Finalize Undo FinalizeVideo/Audio Adjust menu Video/Audio Adjust menu ChapterSetting the picture quality for TV and external inputs Choosing a presetVideo/Audio Adjust menu Setting the picture quality for disc playbackSelect the picture quality setting you want to adjust Built-in TV tunerAudio DRC ‘Max’Initial Setup menu Initial Setup menu ChapterUsing the Initial Setup menu Setting Options ExplanationInitial Setup menu Mpeg Mpeg PCMAudio Language English OtherAuto Language DVD Menu Language w/Subtitle LanguageRecording Settings Manual Recording On go to setup Optimized RecPresentation for widescreen material Pan & ScanParental Lock Set Password Change PasswordRemote Control Mode Recorder Change LevelSelecting other languages for language options Additional information about the TV system settingsAdditional information about component video output Resetting the recorder Setting up the remote to control yourUsing the TV remote control buttons Additional informationAdditional information Screen sizes and disc formats When viewing on a standard TV or monitorWhen viewing on a widescreen TV or monitor General Additional information TroubleshootingProblem Remedy Additional information Frequently asked questions Can I play a VR mode DVD-RW disc in another DVD player?What kind of discs can I use for recording? See also Cprm on Can I play a disc while recording?Additional information About DV DV-related messagesVR mode DVD Video mode DVD Resolution Level Additional information Manual recording modesAdditional information Language code list Country/Area code listLanguage Language code letter, Language code Country/Area, Country/Area code, Code letterMessage Explanation/Action Cleaning the pickup lens Handling discsCondensation Storing discsMoving the recorder Additional information Hints on installationGlossary DRM Digital Rights Management Mpeg audioMpeg video Optical digital outputRegions DVD-Video only Sampling frequencyTitle TrackAdditional information Specifications TimerTuner DVD-R/DVD-RWLINK/IEEE 1394 standard Supplied accessoriesInput/Output Connecting 12, 18 error messages 80 recording from Language audio 52, 71 code list 82 DVD menuIndex Maximum number per title/disc 32 CprmPage Pioneer Corporation VRB1377-A
Related manuals
Manual 100 pages 38.64 Kb

DVR-330-S, DVR-310, DVR-7000 specifications

The Pioneer DVR-7000, DVR-310, and DVR-330-S are remarkable devices in the realm of digital video recording technology. Each of these models presents its unique features, embodying the innovation and quality synonymous with the Pioneer brand.

The Pioneer DVR-7000 is a versatile and robust digital video recorder that has been well-regarded for its exceptional recording capabilities and user-friendly operation. One of its standout features is its ability to record in MPEG-2 format, ensuring high-quality video playback. The device supports both DVD-R and DVD-RW formats, allowing users to create, edit, and finalize their recordings with ease. With a built-in 80GB hard drive, the DVR-7000 offers significant storage space for users to save their favorite content. The intuitive interface makes it simple to navigate through recorded programs, set timers for future recordings, and access various playback options.

Moving to the DVR-310, this model focuses on providing a reliable user experience with enhanced recording and editing features. It supports progressive scan output, providing sharper images and better detail during playback. The DVR-310 also includes a one-touch recording feature, which simplifies the process of capturing shows. Compatible with DVD-R, DVD-RW, and DVD+RW formats, users can enjoy flexibility in the types of media they choose. Its versatile connectivity options, including HDMI output, allow for easy integration into any home theater setup.

The Pioneer DVR-330-S, designed with a sleek aesthetic, combines functionality with cutting-edge technology. Featuring an integrated tuner, it allows users to record and watch live TV without the need for an external device. The DVR-330-S supports dual-layer DVDs, which effectively doubles the storage capacity compared to standard DVDs—ideal for long recordings or high-definition content. One of its key innovations is the Time Slip feature, which lets viewers pause live TV and resume playback seamlessly. In addition, it boasts advanced editing features that enable users to trim and merge recordings effortlessly.

Collectively, the Pioneer DVR-7000, DVR-310, and DVR-330-S showcase the brand's commitment to quality, usability, and technological advancement in home entertainment. With their various capabilities, they cater to a wide range of user preferences, whether for basic recording needs or more sophisticated editing functionalities. These models have solidified Pioneer’s reputation as a leader in digital recording solutions, ensuring that entertainment remains an enjoyable experience for all users.
Top Page Image Contents