Pioneer VSX-1018AH-K manual 02 5 minute guide, Better sound using Phase Control, Phase Control on

Page 12

025 minute guide

It is possible to check on the display whether or not multi- channel playback is being performed properly.

When using a surround back speaker, Dolby Digital EX is displayed when playing Dolby Digital signals, and DTS+Neo:6 is displayed when playing DTS 5.1-channel signals.

When not using a surround back speaker, Dolby Digital is displayed when playing Dolby Digital signals.

4Use the volume control to adjust the volume level. Turn down the volume of your TV so that all sound is coming from the speakers connected to this receiver.

Better sound using Phase Control

This receiver’s Phase Control feature uses phase correction measures to make sure your sound source arrives at the listening position in phase, preventing unwanted distortion and/or coloring of the sound (see illustration below).

During multichannel playback, LFE (Low-Frequency Effects) signals as well as low-frequency signals in each channel are assigned to the subwoofer or other the subwoofer and the most appropriate speaker. At least in theory, however, this type of processing involves a group delay that varies with frequency, resulting in phase distortion where the low-frequency sound is delayed or muffled by the conflict with other channels. With the Phase Control mode switched on, this receiver can reproduce powerful bass sound without deteriorating the quality of the original sound (see illustration below).

Phase Control ON

 

Front speaker

Listening

 

 

position

Sound

 

Original sound

source

Subwoofer

preserved with no

 

 

loss of clarity

•Rhythms with crystal-like clarity

•Bass sound with no loss of depth

•Sound of musical instruments with superb reality Phase Control technology provides coherent sound

reproduction through the use of phase matching1 for an optimal sound image at your listening position. The default setting is on and we recommend leaving Phase Control switched on for all sound sources.

THX

STATUS

PHASE

ANT

MPX

SIGNAL SEL

 

 

MEM

AUDIO

DISPLAY

CH

TV CTRL

RECEIVER

•Press RECEIVER, then press PHASE (PHASE CONTROL) to switch on phase correction.

The PHASE CONTROL indicator on the front panel lights.

Phase Control OFF

 

Front speaker

Listening

 

 

position

Sound

Subwoofer

Sound muffled due

source

to a delay in time

•Rhythms blurred and difficult to hear

•Bass sound with loss of depth

•Sound of musical instruments with no reality

Note

1• Phase matching is a very important factor in achieving proper sound reproduction. If two waveforms are ‘in phase’, they crest and trough together, resulting in increased amplitude, clarity and presence of the sound signal. If a crest of a wave meets a trough (as shown in the upper section of the diagram above), then the sound will be ‘out of phase’ and an unreliable sound image will be produced.

•The PHASE CONTROL feature is available even when the headphones are plugged in.

•If your subwoofer has a phase control switch, set it to the plus (+) sign (or 0°). However, the effect you can actually feel when PHASE CONTROL is set to ON on this receiver depends on the type of your subwoofer. Set your subwoofer to maximize the effect. It is also recommended you try changing the orientation or the place of your subwoofer.

•Set the built-in lowpass filter switch of your subwoofer to OFF. If this cannot be done on your subwoofer, set the cutoff frequency to a higher value.

•If the speaker distance is not properly set, you may not have a maximized PHASE CONTROL effect.

•The PHASE CONTROL mode cannot be set to ON in the following cases:

–When the PURE DIRECT mode is switched on.

–When the HDMI audio output parameter is set to THROUGH in Setting the Audio options on page 71.

12

En

Page 11 Page 13
Image 12
Page 11 Page 13
Contents VSX-1018AH-K Operating Environment Federal Communications Commission Declaration of ConformityModel Number VSX-1018AH-K Responsible Party Name Keep in a Secure AREA. this is for Your SecurityRisk of Electric Shock Do not Open Wash hands after handling Contents Other Settings Using other functionsOther connections Hdmi ControlFeatures Before you startBefore you start Chapter Installing the receiver Before you startChecking what’s in the box Loading the batteriesMinute guide Minute guide ChapterIntroduction to home theater Listening to Surround SoundStart Problems when using the Auto Mcacc Setup Minute guidePlaying a source Select the input source you want to playBetter sound using Phase Control Phase Control onPhase Control OFF Phase Control indicator on the front panel lightsConnecting your equipment Connecting your equipment ChapterRear panel Connecting your equipment Connecting your equipment When making cable connections About the video converterConnecting your equipment Connecting using Hdmi About HdmiConnecting your equipment Connecting your TV and DVD player Connecting your Blu-ray disc playerConnect using a standard video cable Connect using an Hdmi cableFor a second recorder, use the DVR2 in inputs Using the component video jacks Connecting digital audio sourcesUse an optical cable for the connection.2 Use a three-way component video cableConnecting analog audio sources Connecting a component to the front panel inputsAbout the WMA9 Pro decoder Use a coaxial cable for the connectionConnecting your equipment Installing your speaker system Connecting the speakersBare wire connections Placing the speakersBanana plug connections Connecting antennas Connecting external antennasConnecting your equipment Plugging in the receiver Plug the power cord into a power outletControls and displays Controls and displays ChapterFront panel 12 13Operating range of remote control unit Controls and displaysSpeakers Controls and displays Display Controls and displays Remote control RECEIVERTV Ctrl SOURCEMute ReceiverListening to your system Listening to your system ChapterAuto playback Listening in surround soundUsing the Advanced surround effects Listening to your systemListening in stereo Pro Logic IIx Music SeeListening to your system Using Front Stage Surround Advance Using Stream DirectSelecting Mcacc presets Choosing the input signal Using surround back channel processingHdmi Digital Analog Using the Virtual Surround Back mode Using the genre synchronizing function DTS-HD Master Audio/DTS-HD DTS-EXPRESS encoded stereoSources Using the tuner Using the tuner ChapterSaving station presets Listening to the radioUsing the tuner Naming station presetsListening to station presets AbcdefghijklmnopqrstuvwxyzSystem Setup menu System Setup menu ChapterMaking receiver settings from the System Setup menu Select the setting you want to adjustSystem Setup menu McaccIf necessary, confirm the speaker configuration OSD.1 Surround back speaker setting Manual Mcacc setupAdjust the level of the left channel Select ‘Fine SP Distance’ from the Manual Mcacc setup menuFine Channel Level Fine Speaker DistanceAcoustic Calibration EQ Adjust Standing WaveHow to use Acoustic Calibration EQ Professional How to interpret the graphical outputAcoustic Calibration EQ Professional Frequency response of your room.1Using Acoustic Calibration EQ Professional Select ‘EQ Professional’, then press EnterSelect an option and press Enter Select ‘Data Management’ from the System Setup menu Data ManagementChecking Mcacc preset data Copying Mcacc preset dataRenaming Mcacc presets Clearing Mcacc presetsSystem Setup menu Manual speaker setup Speaker SettingSelect ‘Manual SP Setup’, then press Enter Select ‘Speaker Setting’ from the Manual SP Setup menuSelect a setup option Confirm your selected setup optionAdjust the level of each channel using / Channel LevelSpeaker Distance CurveConnecting an iPod Connecting your iPod to the receiverOther connections Other connections ChapterSwitching the iPod controls2 Other connectionsBasic playback controls Other connections Connecting a USB device Connecting your USB device to the receiverSwitch on the receiver and your TV Basic playback controlsUsing XM Radio Connecting your XM Radio receiverCompressed audio compatibility Using XM HD Surround Saving channel presetsUsing the XM Menu Listening to XM RadioUsing Sirius Radio Connecting your Sirius Connect TunerPress Sirius to switch to the Sirius input Listening to Sirius RadioConnecting the multichannel analog inputs Using the Sirius MenuPress / to select the channel preset you want Sirius Menu provides additional Sirius Radio features.2Speaker B setup Switching the speaker systemAre for the Speaker B setting only.2 Selecting the multichannel analog inputsBi-wiring your speakers Bi-amping your front speakersConnect your speakers as shown below Other connections Connecting additional amplifiers MULTI-ZONE listeningMaking MULTI-ZONE connections LargeUsing the MULTI-ZONE controls Basic MULTI-ZONE setup ZoneSurround Back System MULTI-ZONE setup Zone MULTI-ZONE listening optionsConnecting an IR receiver MULTI-ZONE remote controlsUse the Master Volume dial to adjust the volume Press ControlVideo ANT MPX Signal SEL Setting the Hdmi options Setting the Hdmi Control modeHdmi Control Hdmi Control ChapterSynchronized amp mode Before using synchronizationHdmi Control About Hdmi ControlOther Settings Other Settings ChapterInput Setup menu SetupOther Settings Other Setup menuInput function default and possible settings Press Receiver on the remote control, then press SetupMulti Channel Input Setup Zone Audio SetupSR+ Setup for Pioneer flat panel TVs OSD AdjustmentSelect ‘SR+ Setup’ from the Other Setup menu Select the ‘PDP Volume Control’ setting you wantUsing other functions Using other functions ChapterSetting the Audio options Press Return to confirm and exit the menuUsing other functions Setting the Video optionsAUTOc IMAGEhMaking an audio or a video recording Select the source you want to recordPrepare the source you want to record Tune to the radio station, load the CD, video, DVD, etcUsing the sleep timer Switching the speaker impedanceChecking your system settings Dimming the displayResetting the system Default system settingsPress the front panel Auto SURR/STREAM Direct button Press Sound Retriever to confirmSetting the remote to control other components Selecting preset codes directlyPreset code list Controlling the rest of your systemControlling the rest of your system Controls for TVsControls for other components TV CH + VOL +Decide which component you want to use the remote sensor Troubleshooting PowerAdditional information Additional information ChapterAdditional information Other audio problems Settings VideoSignal SEL button Professional Calibration EQ graphical outputDisplay Remote control USB interfaceOr other setting for your component Other setting for your componentReceiver to a component or TV with the DeepColor feature Hdcp Error showsConfiguration a Configuration BImportant information regarding the Hdmi connection XM radio messagesSirius radio messages Additional information Surround sound formats DolbyWindows Media Audio 9 Professional DTS Digital SurroundDTS Neo6 DTS 96/24Additional information About XM About SiriusAbout Neural THX Surround About XM Radio XM Ready LegalStereo 2 channel signal formats PRO Logic aNeural THX b PRO Logic Multichannel signal formats DTS +2 Pro Logic llx Movie aDTS +2 Pro Logic llx Music DTS +Neo6Dolby Digital Plus Straight decoding Direct Pure Direct Dolby Digital SurroundAdditional information Specifications Additional information Cleaning the unit To establish a safe level Once you have established a comfortable sound levelDecibel Level Example Pioneer Corporation

VSX-1018AH-K specifications

The Pioneer VSX-1018AH-K is a powerful home theater receiver that embodies a blend of quality, features, and innovative technology, making it a standout choice for audio enthusiasts and casual listeners alike. This 7.1-channel receiver boasts a robust output of 110 watts per channel, designed to deliver immersive audio across various environments.

One of the key features of the VSX-1018AH-K is its support for advanced audio formats, including Dolby TrueHD and DTS-HD Master Audio. These formats provide a lossless soundtrack experience, ensuring that audio reproduction remains faithful to the original source. This receiver is also equipped with Pioneer’s proprietary MCACC (Multi-Channel Acoustic Calibration System), which allows users to optimize sound settings based on their specific room acoustics. By analyzing and adjusting the sound fields, MCACC ensures that every listener enjoys an enhanced audio experience.

In terms of connectivity, the VSX-1018AH-K excels with its array of inputs and outputs. It includes multiple HDMI inputs, allowing users to seamlessly connect various devices such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it supports HDMI version 1.3, which means it can handle high-definition video signals and deep color technology, enhancing the overall viewing experience.

For those who appreciate versatility, this receiver also features built-in support for both wireless and wired network audio streaming. Users can connect to their home network to enjoy music stored on their devices or access popular streaming services. The USB port allows for easy connection of flash drives, enabling playback of high-resolution audio files.

Moreover, the receiver is equipped with a user-friendly interface and an intuitive remote control, making it easy to navigate through various settings and options. The graphical user interface is designed for simplicity, enabling users to customize preferences without hassle.

The Pioneer VSX-1018AH-K not only focuses on sound but also on video quality, thanks to its upscale capabilities that can convert standard-definition video to high-definition, ensuring that all media looks great on HD displays. Overall, the Pioneer VSX-1018AH-K represents a comprehensive solution for anyone looking to enhance their home theater system, merging advanced technology with user-friendly features aimed at delivering an unparalleled home entertainment experience.
Top Page Image Contents