Pioneer VSX-1018AH-K manual Fine Channel Level, Fine Speaker Distance

Page 42

07The System Setup menu

2 Select the setting you want to adjust.

If you’re doing this for the first time, you might want to make these settings in order.

•Fine Channel Level – Make fine adjustments to the overall balance of your speaker system (see Fine Channel Level on page 42).

•Fine SP Distance – Make precise delay settings for your speaker system (see Fine Speaker Distance on page 42).

•Standing Wave – Control overly resonant low frequencies in your listening room (see Standing Wave on page 43).

The last two settings are specifically for customizing the parameters explained in Acoustic Calibration EQ Adjust on page 43:

•EQ Adjust – Manually adjust the frequency balance of your speaker system while listening to test tones (see Acoustic Calibration EQ Adjust on page 43).

•EQ Professional – Calibrate your system based on the direct sound coming from the speakers and make detailed settings according to your room’s reverb characteristics (see Acoustic Calibration EQ Professional on page 44).

Fine Channel Level

• Default setting: 0.0dB (all channels)

You can achieve better surround sound by properly adjusting the overall balance of your speaker system. The following setting can help you make detailed adjustments that you may not achieve using the Manual speaker setup on page 48.

1Select ‘Fine Channel Level’ from the Manual MCACC setup menu.

The volume increases to the 0.0 dB reference level.

3.Manual

MCACC

 

3a.Fine

Channel Level

 

 

 

 

 

 

 

 

 

a . Fine Channel Level

 

 

 

 

 

b . Fine SP Distance

 

 

 

 

 

 

c . Standing Wave

 

Please wait...

20

 

d . EQ

Adjust

 

 

 

 

 

e . EQ

Professional

 

 

CAUTION

 

 

 

 

 

 

Loud

test tones

will

 

 

 

 

 

be output.

 

 

 

:Return

 

 

 

:Cancel

2 Adjust the level of the left channel.

This will be the reference speaker level, so you may want to keep the level around 0.0dB so that you’ll have plenty of room to adjust the other speaker levels.

3a.Fine Channel Level

MCACC : M1.MEMORY 1

Ref.Ch : L

+0.5dB

ENTER:Next :Cancel

• After pressing ENTER, test tones will be output.

42

3Select each channel in turn and adjust the levels

(+/–10dB) as necessary.

Use / to adjust the volume of the speaker you

selected to match the reference speaker. When it sounds like both tones are the same volume, press  to confirm and continue to the next channel.

3a.Fine Channel Level

 

R

L

L

+0.5dB

 

R

[ -1.5dB]

SBL [ -9.5dB]

C[ +1.0dB] SBR [ +10.0dB] SL [ -9.5dB] SW [ -1.5dB] SR [+10.0dB]

:Finish

•For comparison purposes, the reference speaker will change depending on which speaker you select.

•If you want to go back and adjust a channel, simply use / to select it.

4 When you’re finished, press RETURN.

You will return to the Manual MCACC setup menu.

Fine Speaker Distance

• Default setting: 10’00’’ (all speakers)

For proper sound depth and separation with your system, it is necessary to add a slight bit of delay to some speakers so that all sounds will arrive at the listening position at the same time. You can adjust the distance of each speaker in 1 inch increments. The following setting can help you make detailed adjustments that you may not achieve using the Manual speaker setup on page 48.

1Select ‘Fine SP Distance’ from the Manual MCACC setup menu.

3.Manual

MCACC

 

3b.Fine

SP

Distance

 

a . Fine Channel Level

 

MCACC

: M1.MEMORY 1

 

b . Fine SP Distance

 

 

 

 

 

 

 

 

 

c . Standing Wave

 

 

 

 

 

 

 

 

d . EQ

Adjust

 

Ref.Ch

 

:

L

 

e . EQ

Professional

 

 

10

' 00 "

 

 

 

 

:Return

 

ENTER:Next

 

 

:Cancel

2Adjust the distance of the left channel from the listening position.

3Select each channel in turn and adjust the distance

as necessary.

Use / to adjust the delay of the speaker you selected to match the reference speaker. The delay is measured in terms of speaker distance from 0’01’’ to 45’00’’.

3b.Fine

 

SP

 

Distance

 

3b.Fine

 

SP

 

Distance

 

 

SL

 

 

L

 

 

 

SBL

 

SL

L

 

10

'

10

"

 

 

 

 

 

 

 

 

SBL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

'

02

"

 

 

 

 

 

 

 

 

 

R

[

9

'

11

" ]

 

 

 

 

 

 

 

SBR

[ 6

'

03

" ]

 

 

 

 

 

 

 

 

 

C

[ 10 '

10

" ]

 

 

 

 

 

 

 

SW

[ 12

'

01

" ]

 

 

 

 

 

 

 

 

SL

 

9

'

08

"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SR

[

9

'

09

" ]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

:Finish

 

 

 

 

 

 

 

 

 

:Finish

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

En

Page 41 Page 43
Image 42
Page 41 Page 43
Contents VSX-1018AH-K Model Number VSX-1018AH-K Responsible Party Name Operating EnvironmentFederal Communications Commission Declaration of Conformity Keep in a Secure AREA. this is for Your SecurityRisk of Electric Shock Do not Open Wash hands after handling Contents Other connections Other SettingsUsing other functions Hdmi ControlFeatures Before you startBefore you start Chapter Checking what’s in the box Installing the receiverBefore you start Loading the batteriesIntroduction to home theater Minute guideMinute guide Chapter Listening to Surround SoundStart Playing a source Problems when using the Auto Mcacc SetupMinute guide Select the input source you want to playPhase Control OFF Better sound using Phase ControlPhase Control on Phase Control indicator on the front panel lightsConnecting your equipment Connecting your equipment ChapterRear panel Connecting your equipment Connecting your equipment When making cable connections About the video converterConnecting your equipment Connecting using Hdmi About HdmiConnect using a standard video cable Connecting your equipment Connecting your TV and DVD playerConnecting your Blu-ray disc player Connect using an Hdmi cableFor a second recorder, use the DVR2 in inputs Use an optical cable for the connection.2 Using the component video jacksConnecting digital audio sources Use a three-way component video cableAbout the WMA9 Pro decoder Connecting analog audio sourcesConnecting a component to the front panel inputs Use a coaxial cable for the connectionConnecting your equipment Installing your speaker system Connecting the speakersBare wire connections Placing the speakersBanana plug connections Connecting antennas Connecting external antennasConnecting your equipment Plugging in the receiver Plug the power cord into a power outletFront panel Controls and displaysControls and displays Chapter 12 13Operating range of remote control unit Controls and displaysSpeakers Controls and displays Display Controls and displays Remote control RECEIVERMute TV CtrlSOURCE ReceiverAuto playback Listening to your systemListening to your system Chapter Listening in surround soundListening in stereo Using the Advanced surround effectsListening to your system Pro Logic IIx Music SeeListening to your system Using Front Stage Surround Advance Using Stream DirectSelecting Mcacc presets Choosing the input signal Using surround back channel processingHdmi Digital Analog Using the Virtual Surround Back mode Using the genre synchronizing function DTS-HD Master Audio/DTS-HD DTS-EXPRESS encoded stereoSources Saving station presets Using the tunerUsing the tuner Chapter Listening to the radioListening to station presets Using the tunerNaming station presets AbcdefghijklmnopqrstuvwxyzMaking receiver settings from the System Setup menu System Setup menuSystem Setup menu Chapter Select the setting you want to adjustSystem Setup menu McaccIf necessary, confirm the speaker configuration OSD.1 Surround back speaker setting Manual Mcacc setupFine Channel Level Adjust the level of the left channelSelect ‘Fine SP Distance’ from the Manual Mcacc setup menu Fine Speaker DistanceAcoustic Calibration EQ Adjust Standing WaveAcoustic Calibration EQ Professional How to use Acoustic Calibration EQ ProfessionalHow to interpret the graphical output Frequency response of your room.1Using Acoustic Calibration EQ Professional Select ‘EQ Professional’, then press EnterSelect an option and press Enter Select ‘Data Management’ from the System Setup menu Data ManagementRenaming Mcacc presets Checking Mcacc preset dataCopying Mcacc preset data Clearing Mcacc presetsSelect ‘Manual SP Setup’, then press Enter System Setup menu Manual speaker setupSpeaker Setting Select ‘Speaker Setting’ from the Manual SP Setup menuAdjust the level of each channel using / Select a setup optionConfirm your selected setup option Channel LevelSpeaker Distance CurveOther connections Connecting an iPodConnecting your iPod to the receiver Other connections ChapterSwitching the iPod controls2 Other connectionsBasic playback controls Switch on the receiver and your TV Other connections Connecting a USB deviceConnecting your USB device to the receiver Basic playback controlsUsing XM Radio Connecting your XM Radio receiverCompressed audio compatibility Using the XM Menu Using XM HD SurroundSaving channel presets Listening to XM RadioPress Sirius to switch to the Sirius input Using Sirius RadioConnecting your Sirius Connect Tuner Listening to Sirius RadioPress / to select the channel preset you want Connecting the multichannel analog inputsUsing the Sirius Menu Sirius Menu provides additional Sirius Radio features.2Are for the Speaker B setting only.2 Speaker B setupSwitching the speaker system Selecting the multichannel analog inputsBi-wiring your speakers Bi-amping your front speakersConnect your speakers as shown below Making MULTI-ZONE connections Other connections Connecting additional amplifiersMULTI-ZONE listening LargeSurround Back System MULTI-ZONE setup Zone Using the MULTI-ZONE controlsBasic MULTI-ZONE setup Zone MULTI-ZONE listening optionsUse the Master Volume dial to adjust the volume Connecting an IR receiverMULTI-ZONE remote controls Press ControlVideo ANT MPX Signal SEL Hdmi Control Setting the Hdmi optionsSetting the Hdmi Control mode Hdmi Control ChapterHdmi Control Synchronized amp modeBefore using synchronization About Hdmi ControlInput Setup menu Other SettingsOther Settings Chapter SetupInput function default and possible settings Other SettingsOther Setup menu Press Receiver on the remote control, then press SetupMulti Channel Input Setup Zone Audio SetupSelect ‘SR+ Setup’ from the Other Setup menu SR+ Setup for Pioneer flat panel TVsOSD Adjustment Select the ‘PDP Volume Control’ setting you wantSetting the Audio options Using other functionsUsing other functions Chapter Press Return to confirm and exit the menuAUTOc Using other functionsSetting the Video options IMAGEhPrepare the source you want to record Making an audio or a video recordingSelect the source you want to record Tune to the radio station, load the CD, video, DVD, etcChecking your system settings Using the sleep timerSwitching the speaker impedance Dimming the displayPress the front panel Auto SURR/STREAM Direct button Resetting the systemDefault system settings Press Sound Retriever to confirmPreset code list Setting the remote to control other componentsSelecting preset codes directly Controlling the rest of your systemControlling the rest of your system Controls for TVsCH + Controls for other componentsTV  VOL +Decide which component you want to use the remote sensor Additional information TroubleshootingPower Additional information ChapterAdditional information Other audio problems Settings VideoSignal SEL button Professional Calibration EQ graphical outputDisplay Remote control USB interfaceReceiver to a component or TV with the DeepColor feature Or other setting for your componentOther setting for your component Hdcp Error showsImportant information regarding the Hdmi connection Configuration aConfiguration B XM radio messagesSirius radio messages Additional information Surround sound formats DolbyDTS Neo6 Windows Media Audio 9 ProfessionalDTS Digital Surround DTS 96/24About Neural THX Surround Additional information About XMAbout Sirius About XM Radio XM Ready LegalStereo 2 channel signal formats PRO Logic aNeural THX b PRO Logic DTS +2 Pro Logic llx Music Multichannel signal formatsDTS +2 Pro Logic llx Movie a DTS +Neo6Dolby Digital Plus Straight decoding Direct Pure Direct Dolby Digital SurroundAdditional information Specifications Additional information Cleaning the unit To establish a safe level Once you have established a comfortable sound levelDecibel Level Example Pioneer Corporation

VSX-1018AH-K specifications

The Pioneer VSX-1018AH-K is a powerful home theater receiver that embodies a blend of quality, features, and innovative technology, making it a standout choice for audio enthusiasts and casual listeners alike. This 7.1-channel receiver boasts a robust output of 110 watts per channel, designed to deliver immersive audio across various environments.

One of the key features of the VSX-1018AH-K is its support for advanced audio formats, including Dolby TrueHD and DTS-HD Master Audio. These formats provide a lossless soundtrack experience, ensuring that audio reproduction remains faithful to the original source. This receiver is also equipped with Pioneer’s proprietary MCACC (Multi-Channel Acoustic Calibration System), which allows users to optimize sound settings based on their specific room acoustics. By analyzing and adjusting the sound fields, MCACC ensures that every listener enjoys an enhanced audio experience.

In terms of connectivity, the VSX-1018AH-K excels with its array of inputs and outputs. It includes multiple HDMI inputs, allowing users to seamlessly connect various devices such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it supports HDMI version 1.3, which means it can handle high-definition video signals and deep color technology, enhancing the overall viewing experience.

For those who appreciate versatility, this receiver also features built-in support for both wireless and wired network audio streaming. Users can connect to their home network to enjoy music stored on their devices or access popular streaming services. The USB port allows for easy connection of flash drives, enabling playback of high-resolution audio files.

Moreover, the receiver is equipped with a user-friendly interface and an intuitive remote control, making it easy to navigate through various settings and options. The graphical user interface is designed for simplicity, enabling users to customize preferences without hassle.

The Pioneer VSX-1018AH-K not only focuses on sound but also on video quality, thanks to its upscale capabilities that can convert standard-definition video to high-definition, ensuring that all media looks great on HD displays. Overall, the Pioneer VSX-1018AH-K represents a comprehensive solution for anyone looking to enhance their home theater system, merging advanced technology with user-friendly features aimed at delivering an unparalleled home entertainment experience.
Top Page Image Contents