Pioneer VSX-1018AH-K manual Additional information

Page 81

Additional information

13

SymptomRemedy

No sound from the surround or center speakers.

•Check that the Stereo listening mode or the Front Stage Surround Advance mode isn’t selected; select one of the surround listening modes (see Listening in surround sound on page 30).

•Check that the surround/center speakers are not set to NO (see Speaker Setting on page 48).

•Check the channel level settings (see Channel Level on page 49).

 

• Check the speaker connections (see Connecting the speakers on page 21).

 

 

No sound from surround back

• Check that the surround back speakers are set to LARGE or SMALL (see Speaker Setting on

speakers.

page 48).

 

• Make sure surround back processing is set to SBch ON (see Using surround back channel

 

processing on page 33).

 

• If the source is Dolby Surround EX or DTS-ES with no flag to indicate 6.1 compatibility, then with

 

surround back processing set to SBch Auto, there will be no sound from the surround back

 

speakers. In this case, set to SBch ON (see Using surround back channel processing on page 33).

 

• If the source does not have 6.1 playback channels, make sure that surround back processing is set

 

to SBch ON and a surround mode is selected (see Listening in surround sound on page 30).

 

• Check the speaker connections (see Connecting the speakers on page 21). If only one surround

 

back speaker is connected, make sure it’s connected to the left channel speaker terminal.

 

 

No sound from subwoofer.

• Check that the subwoofer is connected properly, switched on and the volume turned up.

 

• If your subwoofer has a sleep function, make sure it is switched off.

 

• Make sure that the Subwoofer setting is YES or PLUS (see Speaker Setting on page 48).

 

• The crossover frequency may be set too low; try setting it higher to match the characteristics of

 

your other speakers (see Speaker Setting on page 48).

 

• If there is very little low frequency information in the source material, change your speaker settings

 

to Front: SMALL / Subwoofer: YES, or Front: LARGE / Subwoofer: PLUS (see Speaker Setting on

 

page 48).

 

• Check that the LFE channel is not set to OFF, or a very quiet setting (see Setting the Audio options

 

on page 71).

 

• Check the speaker level settings (see Channel Level on page 49).

 

 

No sound from one speaker.

• Check the speaker connection (see Connecting the speakers on page 21).

 

• Check the speaker level settings (see Channel Level on page 49).

 

• Check that the speaker hasn’t been set to NO (see Speaker Setting on page 48).

 

• The channel may not be recorded in the source. By using one of the advanced effect listening

 

mode, you may be able to create the missing channel (see Listening in surround sound on page 30).

 

 

Sound is produced from

• Check that the input signal type is set to DIGITAL (see Choosing the input signal on page 33).

analog components, but not

• Make sure that the digital input is assigned correctly for the input jack the component is connected

from digital ones (DVD, LD, CD-

to (see The Input Setup menu on page 67).

ROM, etc.).

• Check the digital output settings on the source component.

 

 

• If the source component has a digital volume control, make sure this is not turned down.

 

• Make sure that the multichannel analog inputs are not selected. Select any other input source.

 

 

No sound is output or a noise is

• Check that your DVD player is compatible with Dolby Digital/DTS discs.

output when Dolby Digital/DTS

• Check the digital output settings of your DVD player. Make sure that the DTS signal output is set

software is played back.

to On.

 

• If the source component has a digital volume control, make sure this is not turned down.

 

 

No sound when using the

• If the HDMI input source is selected, sound is muted until exiting either menu.

System Setup or Status menu.

• If sound is muted in the sub zone (ZONE 2), it will be restored after exiting the System Setup menu.

 

 

81

En

Page 80 Page 82
Image 81
Page 80 Page 82
Contents VSX-1018AH-K Federal Communications Commission Declaration of Conformity Operating EnvironmentModel Number VSX-1018AH-K Responsible Party Name Keep in a Secure AREA. this is for Your SecurityRisk of Electric Shock Do not Open Wash hands after handling Contents Using other functions Other SettingsOther connections Hdmi ControlFeatures Before you startBefore you start Chapter Before you start Installing the receiverChecking what’s in the box Loading the batteriesMinute guide Chapter Minute guideIntroduction to home theater Listening to Surround SoundStart Minute guide Problems when using the Auto Mcacc SetupPlaying a source Select the input source you want to playPhase Control on Better sound using Phase ControlPhase Control OFF Phase Control indicator on the front panel lightsConnecting your equipment Connecting your equipment ChapterRear panel Connecting your equipment About the video converter Connecting your equipment When making cable connectionsAbout Hdmi Connecting your equipment Connecting using HdmiConnecting your Blu-ray disc player Connecting your equipment Connecting your TV and DVD playerConnect using a standard video cable Connect using an Hdmi cableFor a second recorder, use the DVR2 in inputs Connecting digital audio sources Using the component video jacksUse an optical cable for the connection.2 Use a three-way component video cableConnecting a component to the front panel inputs Connecting analog audio sourcesAbout the WMA9 Pro decoder Use a coaxial cable for the connectionConnecting the speakers Connecting your equipment Installing your speaker systemBare wire connections Placing the speakersBanana plug connections Connecting external antennas Connecting antennasPlug the power cord into a power outlet Connecting your equipment Plugging in the receiverControls and displays Chapter Controls and displaysFront panel 12 13Operating range of remote control unit Controls and displaysSpeakers Controls and displays Display RECEIVER Controls and displays Remote controlSOURCE TV CtrlMute ReceiverListening to your system Chapter Listening to your systemAuto playback Listening in surround soundListening to your system Using the Advanced surround effectsListening in stereo Pro Logic IIx Music SeeListening to your system Using Front Stage Surround Advance Using Stream DirectSelecting Mcacc presets Choosing the input signal Using surround back channel processingHdmi Digital Analog Using the Virtual Surround Back mode Using the genre synchronizing function DTS-HD Master Audio/DTS-HD DTS-EXPRESS encoded stereoSources Using the tuner Chapter Using the tunerSaving station presets Listening to the radioNaming station presets Using the tunerListening to station presets AbcdefghijklmnopqrstuvwxyzSystem Setup menu Chapter System Setup menuMaking receiver settings from the System Setup menu Select the setting you want to adjustMcacc System Setup menuIf necessary, confirm the speaker configuration OSD.1 Manual Mcacc setup Surround back speaker settingSelect ‘Fine SP Distance’ from the Manual Mcacc setup menu Adjust the level of the left channelFine Channel Level Fine Speaker DistanceStanding Wave Acoustic Calibration EQ AdjustHow to interpret the graphical output How to use Acoustic Calibration EQ ProfessionalAcoustic Calibration EQ Professional Frequency response of your room.1Using Acoustic Calibration EQ Professional Select ‘EQ Professional’, then press EnterSelect an option and press Enter Data Management Select ‘Data Management’ from the System Setup menuCopying Mcacc preset data Checking Mcacc preset dataRenaming Mcacc presets Clearing Mcacc presetsSpeaker Setting System Setup menu Manual speaker setupSelect ‘Manual SP Setup’, then press Enter Select ‘Speaker Setting’ from the Manual SP Setup menuConfirm your selected setup option Select a setup optionAdjust the level of each channel using / Channel LevelCurve Speaker DistanceConnecting your iPod to the receiver Connecting an iPodOther connections Other connections ChapterSwitching the iPod controls2 Other connectionsBasic playback controls Connecting your USB device to the receiver Other connections Connecting a USB deviceSwitch on the receiver and your TV Basic playback controlsUsing XM Radio Connecting your XM Radio receiverCompressed audio compatibility Saving channel presets Using XM HD SurroundUsing the XM Menu Listening to XM RadioConnecting your Sirius Connect Tuner Using Sirius RadioPress Sirius to switch to the Sirius input Listening to Sirius RadioUsing the Sirius Menu Connecting the multichannel analog inputsPress / to select the channel preset you want Sirius Menu provides additional Sirius Radio features.2Switching the speaker system Speaker B setupAre for the Speaker B setting only.2 Selecting the multichannel analog inputsBi-wiring your speakers Bi-amping your front speakersConnect your speakers as shown below MULTI-ZONE listening Other connections Connecting additional amplifiersMaking MULTI-ZONE connections LargeBasic MULTI-ZONE setup Zone Using the MULTI-ZONE controlsSurround Back System MULTI-ZONE setup Zone MULTI-ZONE listening optionsMULTI-ZONE remote controls Connecting an IR receiverUse the Master Volume dial to adjust the volume Press ControlVideo ANT MPX Signal SEL Setting the Hdmi Control mode Setting the Hdmi optionsHdmi Control Hdmi Control ChapterBefore using synchronization Synchronized amp modeHdmi Control About Hdmi ControlOther Settings Chapter Other SettingsInput Setup menu SetupOther Setup menu Other SettingsInput function default and possible settings Press Receiver on the remote control, then press SetupZone Audio Setup Multi Channel Input SetupOSD Adjustment SR+ Setup for Pioneer flat panel TVsSelect ‘SR+ Setup’ from the Other Setup menu Select the ‘PDP Volume Control’ setting you wantUsing other functions Chapter Using other functionsSetting the Audio options Press Return to confirm and exit the menuSetting the Video options Using other functionsAUTOc IMAGEhSelect the source you want to record Making an audio or a video recordingPrepare the source you want to record Tune to the radio station, load the CD, video, DVD, etcSwitching the speaker impedance Using the sleep timerChecking your system settings Dimming the displayDefault system settings Resetting the systemPress the front panel Auto SURR/STREAM Direct button Press Sound Retriever to confirmSelecting preset codes directly Setting the remote to control other componentsPreset code list Controlling the rest of your systemControls for TVs Controlling the rest of your systemTV  Controls for other componentsCH + VOL +Decide which component you want to use the remote sensor Power TroubleshootingAdditional information Additional information ChapterAdditional information Other audio problems Video SettingsSignal SEL button Professional Calibration EQ graphical outputDisplay USB interface Remote controlOther setting for your component Or other setting for your componentReceiver to a component or TV with the DeepColor feature Hdcp Error showsConfiguration B Configuration aImportant information regarding the Hdmi connection XM radio messagesSirius radio messages Dolby Additional information Surround sound formatsDTS Digital Surround Windows Media Audio 9 ProfessionalDTS Neo6 DTS 96/24About Sirius Additional information About XMAbout Neural THX Surround About XM Radio XM Ready LegalStereo 2 channel signal formats PRO Logic aNeural THX b PRO Logic DTS +2 Pro Logic llx Movie a Multichannel signal formatsDTS +2 Pro Logic llx Music DTS +Neo6Dolby Digital Plus Straight decoding Dolby Digital Surround Direct Pure DirectAdditional information Specifications Additional information Cleaning the unit To establish a safe level Once you have established a comfortable sound levelDecibel Level Example Pioneer Corporation

VSX-1018AH-K specifications

The Pioneer VSX-1018AH-K is a powerful home theater receiver that embodies a blend of quality, features, and innovative technology, making it a standout choice for audio enthusiasts and casual listeners alike. This 7.1-channel receiver boasts a robust output of 110 watts per channel, designed to deliver immersive audio across various environments.

One of the key features of the VSX-1018AH-K is its support for advanced audio formats, including Dolby TrueHD and DTS-HD Master Audio. These formats provide a lossless soundtrack experience, ensuring that audio reproduction remains faithful to the original source. This receiver is also equipped with Pioneer’s proprietary MCACC (Multi-Channel Acoustic Calibration System), which allows users to optimize sound settings based on their specific room acoustics. By analyzing and adjusting the sound fields, MCACC ensures that every listener enjoys an enhanced audio experience.

In terms of connectivity, the VSX-1018AH-K excels with its array of inputs and outputs. It includes multiple HDMI inputs, allowing users to seamlessly connect various devices such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it supports HDMI version 1.3, which means it can handle high-definition video signals and deep color technology, enhancing the overall viewing experience.

For those who appreciate versatility, this receiver also features built-in support for both wireless and wired network audio streaming. Users can connect to their home network to enjoy music stored on their devices or access popular streaming services. The USB port allows for easy connection of flash drives, enabling playback of high-resolution audio files.

Moreover, the receiver is equipped with a user-friendly interface and an intuitive remote control, making it easy to navigate through various settings and options. The graphical user interface is designed for simplicity, enabling users to customize preferences without hassle.

The Pioneer VSX-1018AH-K not only focuses on sound but also on video quality, thanks to its upscale capabilities that can convert standard-definition video to high-definition, ensuring that all media looks great on HD displays. Overall, the Pioneer VSX-1018AH-K represents a comprehensive solution for anyone looking to enhance their home theater system, merging advanced technology with user-friendly features aimed at delivering an unparalleled home entertainment experience.
Top Page Image Contents