Pioneer PDP-5000EX manual Safety Precautions

Safety Precautions

Safety Precautions

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your product, please read the following precautions carefully before using the product.

1.Read instructions — All operating instructions must be read and understood before the product is operated.

2.Keep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future reference.

3.Observe warnings — All warnings on the product and in the instructions must be observed closely.

4.Follow instructions — All operating instructions must be followed.

5.Cleaning — Unplug the power cord from the AC outlet before cleaning the product. To clean the product, use the supplied cleaning cloth or other soft clothes (e.g., cotton, flannel). Do not use liquid cleaners or aerosol cleaners.

6.Attachments — Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result in accidents.

7.Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement.

8.Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

9.When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart.

10.Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.

11.Power source — This product must operate on a power source specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

12.Power cord protection — The power cords must be routed properly to prevent people from stepping on them or

02

objects from resting on them. Check the cords at the plugs and product.

13.	The Plasma Display used in this product is made of glass.	English
	Therefore, it can break when the product is dropped or
	applied with impact. Be careful not to be injured by broken
	glass pieces in case the Plasma Display breaks.
14.	Overloading — Do not overload AC outlets or extension
	cords. Overloading can cause fire or electric shock.
15.	Entering of objects and liquids — Never insert an object
	into the product through vents or openings. High voltage
	flows in the product, and inserting an object can cause
	electric shock and/or short internal parts. For the same
	reason, do not spill water or liquid on the product.
16.	Servicing — Do not attempt to service the product yourself.
	Removing covers can expose you to high voltage and other
	dangerous conditions. Request a qualified service person
	to perform servicing.
17.	Repair — If any of the following conditions occurs, unplug
	the power cord from the AC outlet, and request a qualified
	service person to perform repairs.
	a. When the power cord or plug is damaged.
	b. When a liquid was spilled on the product or when
	objects have fallen into the product.
	c. When the product has been exposed to rain or water.
	d. When the product does not operate properly as
	described in the operating instructions.
	Do not touch the controls other than those described in
	the operating instructions. Improper adjustment of
	controls not described in the instructions can cause
	damage, which often requires extensive adjustment
	work by a qualified technician.
	e. When the product has been dropped or damaged.
	f. When the product displays an abnormal condition. Any
	noticeable abnormality in the product indicates that the
	product needs servicing.
18.	Replacement parts — In case the product needs
	replacement parts, make sure that the service person uses
	replacement parts specified by the manufacturer, or those
	with the same characteristics and performance as the
	original parts. Use of unauthorized parts can result in fire,
	electric shock and/or other danger.
19.	Safety checks — Upon completion of service or repair
	work, request the service technician to perform safety
	checks to ensure that the product is in proper operating
	condition.
20.	Wall or ceiling mounting — When mounting the product
	on a wall or ceiling, be sure to install the product according
	to the method recommended by the manufacturer.
21.	Heat sources — Keep the product away from heat sources
	such as radiators, heaters, stoves and other heat-
	generating products (including amplifiers).
22.	Unplug the power cord from the AC outlet before installing
	the speakers.
23.	Never expose the screen of the Plasma Display to a strong
	impact, for example, by hitting it. The screen may be
	broken, resulting in fire or personal injury.
24.	Do not expose the Plasma Display to direct sunlight for a
	long period of time. The optical characteristics of the front
	protection panel changes, resulting in discolouration or
	warp.
25.	The Plasma Display weighs about 39.8 kg. Because it has
	small depth and is unstable, unpack, carry, and install the

product with one more person at least and use the handles.

9

En