Basic Adjustment Settings | 09 |
Power Control
Power Control provides convenient functions for power saving.
Energy Save
You may use one of the two Energy Save modes to save power consumption.
1Press HOME MENU.
2Select “Power Control” (
/
then ENTER (ENTER/DISP.)).
3Select “Energy Save” (
/
).
4Select “Save 1” or ”Save 2” (
/
).
Item | Description |
Standard | Does not decrease the picture brightness. |
|
|
Save1 | Slightly lowers power consumption while |
| slightly suppressing the brightness drop level. |
|
|
Save2 | Decreases the picture brightness and lowers |
| power consumption. |
5Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit the menu.
No Signal off
The Plasma Display will be automatically placed into the standby mode if no signal is received for 8 minutes.
1Press HOME MENU.
2Select “Power Control” (
/
then ENTER (ENTER/DISP.).
3Select “No Signal off” (
/
).
4Select ”Enable” (
/
).
Item | Description |
Disable | Does not place the Plasma Display into the |
| standby mode. |
|
|
Enable | Places the Plasma Display into the standby |
| mode if no signal is received for 8 minutes. |
Power Management
The Plasma Display will be automatically placed into the standby mode when no signal is received.
1Press HOME MENU.
2Select “Power Control” (
/
then ENTER (ENTER/DISP.)).
3Select “Power Management” (
/
).
4Select “Enable” (
/
).
Item | Description |
Disable | No power management |
|
|
Enable | If no input signal is detected for one minute or |
| more, the unit automatically enters the standby |
| mode. If a signal is subsequently detected, the |
| unit automatically turns ON. |
5Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit the menu.
NOTE
•INPUT1 and INPUT4 only are enabled. However, when “Signal Type” is set to “AV”, they are disabled.
•Operation is disabled during display of the HOME MENU.
English
5Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit the menu.
NOTE
•INPUT1 to INPUT6 are enabled. INPUT1 and 4 are disabled, however, when they have “Signal Type” set to “PC.”
•Operation is disabled during display of the HOME MENU.
•A message will be displayed immediately before the Plasma Display enters standby mode.
29
En