Relay Alarm
When alarm signals are input one after another with an interval of a few seconds, an interlocked alarm input can be identified and enable another operation.
Alarm Out
[Enable/Disable] Check [Enable] to use the alarm output and [Disable] to not use it.
[Configuration Items] These items are used to set the signal output from the alarm output terminal.
•[Momentum]
Set the time period for which the alarm output is to be continued.
•[Value]
Select whether the [High] or [Low] level signal is output as the alarm output.
•[Power on Init]
Select whether or not the alarm signal is output from the alarm output of
*Set the alarm output according to the output destination device.
*After completing alarm configurations, be sure to confirm that the alarm operations are performed as intended.
22
