JVC VN-C30U instruction manual Control windows

Control windows

[Pan/Tilt/Zoom] control window

The sub-window shown below can be used for the control of panning, tilting, zooming and position movement.

The VN-C30U unit incorporates a position memory storing up to 10 pan/tilt positions used in image capturing. Clicking one of the 10 (No.) buttons enables the camera to start the pan/tilt operation to the corresponding position stored in the memory. When the mouse pointer is placed over the Move Position button, the Pan/Tilt/Zoom location of each position will be displayed in Alt.

The pan/tilt position can be changed using these 8 pan/tilt control buttons. The amount of movement per press of a pan/tilt button is the “Angle Step”.

The current [Zoom Step] and [Angle Step] settings for the pan/tilt operation are displayed.

Either setting can be changed by entering the desired angle value (integer) and clicking on the <Apply> button.

The lens zooming can be changed using these two buttons. The amount of lens movement per press of the button is the “Zoom Step”.

CAUTION

Do not execute the pan/tilt operation until the web browser has completed loading the images of all the buttons.

16