[Alarm Configuration] window
This window sets the action to be performed when an alarm signal is input.
Alarm 1 or 2
[On/Off] Check [On] when using the corresponding alarm input (1 or 2) and check [Off] when not using it.
[Settings] An alarm input enables the camera movement to one of the positions stored in the position memory and an alarm signal output.
•[Go to a Preset Position]
Select one of the positions 1 to 10, which have been set in the
•[Alarm Out]
When “Yes” is selected, the alarm output outputs the signal set in [Alarm Out] below in the case of an alarm input.
•[FTP]
When “1” or a larger value is selected, the FTP client function will be enabled for a certain period according to the current FTP settings, even if the function is disabled by a setting. (To make this possible, the FTP settings should be set to enable FTP in advance.)
21
