Pioneer PDP-5000EX manual Connecting Hdmi equipment, Hdmi equipment To activate the Hdmi terminal

11Enjoying through External Equipment

Input signal correlation table

720*480p@59.94/60 Hz

720(1440)*480i@59.94/60 Hz

For audio, the Plasma Display supports the following:

•Linear PCM (STEREO 2ch)

•Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

NOTE

• PC signals are out of correspondence.

Connecting HDMI equipment

When using the INPUT2 or INPUT3 HDMI terminal:

INPUT2	INPUT3		INPUT2		INPUT3
HDMI	HDMI
		R	L	R	L

HDMI cable having the HDMI mark (commercially available.)

AUDIO cable (commercially available.)

Connect the AUDIO cable only when inputting analogue audio signals.

HDMI equipment

To activate the HDMI terminal:

When you use the INPUT2 or INPUT3 HDMI terminal, use the following procedure to activate the terminal.

1Press HOME MENU.

2Select “Setup” (/ then ENTER (ENTER/DISP.)).

3Select “INPUT2” or “INPUT3” (/ then ENTER (ENTER/ DISP.)).

4Select “Video” or “Audio” (/).

5Set the “Video” or “Audio” setting.

6Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit the menu.

To specify the type of digital video signals:

1Repeat steps 1 to 2 provided for “To activate the HDMI terminal”.

2Select “Video” (/).

3Select the type of digital video signals (/).

34

•If you select “Auto”, an attempt will be made to identify the type of digital video signals when digital video signals are received.

Item	Description
Auto	Automatically identifies input digital video signals.
Color-1	Digital Component Video signals (4:2:2) locked
Color-2	Digital Component Video signals (4:4:4) locked
Color-3	Digital RGB signals (16 to 235) locked
Color-4	Digital RGB signals (0 to 255) locked

4Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit the menu.

NOTE

•If you select a parameter other than “Auto”, make such a setting that results in natural color.

•If the images do not come in clearly, specify another digital video signal type.

•For the digital video signal types to be specified, check the operation manual that came with the connected equipment.

To specify the type of audio signals:

When you use the INPUT2 or INPUT3 HDMI terminal, use the following procedure to specify the type of audio signals.

1Repeat steps 1 to 2 provided for “To activate the HDMI terminal”.

2Select “Audio” (/).

3Select the type of audio signals (/).

•If you select “Auto”, an attempt will be made to identify the type of audio signals when audio signals are received.

Item	Description
Auto	Automatically identifies input audio signals.
Digital	Accepts digital audio signals.
Analogue	Accepts analogue audio signals.

4Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit the menu.

NOTE

•If no sound is output, specify another audio signal type.

•For the audio signal types to be specified, check the operation manual that came with the connected equipment.

•Depending on the equipment to be connected, you also need to connect analogue audio cables.

En