[ Analog Output ]
Select the analogue audio setting based on the audio device that is connected through the analogue audio socket.
•[ Stereo ] – for stereo output.
•[ LT/RT ] – for surround sound output through two speakers.
•[ Multi Channel ] – for multi channel output.
[ Digital Audio Setup ]
Select the setting based on the digital amplifier/receiver that is connected through the digital socket.
•[ Digital Output ] – select the type of digital output.
Option | Description |
[ Off ] | Disable digital output. |
|
|
[ All ] | The device supports |
| |
| formats. |
|
|
[ PCM Only ] | The device is not capable |
| of decoding |
| audio. Audio is |
| downmixed to two- |
| channel sound: see [ |
| LPCM Output ] setting. |
•[ LPCM Output ] – select the LPCM (Linear Pulse Code Modulation) output sampling rate.
Option | Description |
[ 48k ] | For discs recorded at |
| sampling rate of 48 kHz. |
|
|
[ 96k ] | For discs recorded at the |
| sampling rate of 96 kHz. |
Note
•[ Digital Audio Setup ] setting is only available if the [ HDMI Audio ] is set to [ Off ].
•[ LPCM Output ] setting is only available if the [ Digital Output ] is set to [ PCM only ].
•The higher the sampling rate, the better the sound quality.
[ HDMI Audio ]
Select the audio output setting when you connect this DVD player and the TV with a HDMI cable.
•[ On ] – audio output through the TV.
•[ Off ] – disable audio output from the TV.
[ Sound Mode ]
Select a preset sound effect to enhance the audio output.
•[ 3D ] – select a virtual surround sound effect that is produced from the left and right audio channels.
•[ Movie Mode ] – select a sound effect for movies.
•[ Music Mode ] – select a sound effect for music.
[ Speaker Setup ]
When you connect a speaker system, you can optimise surround output for the connected speakers.
•[ Front Speaker ]
Option | Description |
[ Large ] | Produce low frequency |
| signal below 120 Hz. |
[ Small ] | Cannot produce low |
| frequency signal below |
| 120 Hz. |
Adjust settings English
EN 31
