Pioneer PRO-950HD manual Power Control, Sound Effect, Energy Save, No Signal off AV source only

Adjustments and Settings 11

Sound Effect

You can select from SRS FOCUS, SRS or SRS TruBass.

1Press HOME MENU.

2Select “Sound” (/ then ENTER).

3Select “Sound Effect” (/ then ENTER).

4Select “SRS FOCUS”, “SRS” or “SRS TruBass” (/).

5Select the desired parameter (/).

SRS FOCUS

Selections	Off	Deactivates SRS FOCUS®
	On	Activates SRS FOCUS®
		Shifts the apparent direction of the sound
		upward for more clearly defined sound
SRS
Selections	Off	Deactivates SRS®
	On	Activates SRS®
		Reproduces highly effective
		three-dimensional sound
SRS TruBass
Selections	Off	Deactivates SRS TruBass®
	On	Activates SRS TruBass®
		Provides deep, rich bass using a new
		technology

6Press HOME MENU to exit the menu.

Note

• (WOW) denotes a status where SRS FOCUS®,

SRS® and SRS TruBass® are on.

•You cannot adjust the sound effect for listening with headphones.

•If you change the sound effect with headphones connected, the new setting will become effective as soon as you disconnect the headphones.

•The effect of this function differs depending on signals.

Power Control

Power Control provides convenient functions for saving power.

Energy Save

You may use one of the three Energy Save modes to save power consumption.

1Press HOME MENU.

2Select “Power Control” (/ then ENTER).

3Select “Energy Save” (/ then ENTER).

4Select “Mode 1”, “Mode 2”, or “Picture Off” (/ then ENTER).

Item	Description
Off	Does not decrease picture brightness
Mode 1	Slightly lowers power consumption while slightly
	suppressing the brightness drop level
Mode 2	Decreases the picture brightness and lowers power
	consumption
Picture Off	Deactivates the screen to save power. To restore the
	screen display, press any button other than VOL +/–
	and MUTING.
	This setting is not memorized by the system.

5Press HOME MENU to exit the menu.

Note

•When you change the Energy Save mode, you may notice a change in the panel sound. This is normal.

•Energy Save maintains efficiency of the screen for a long period of time by decreasing picture brightness and lowering power consumption. Setting Energy Save to “Mode 1” is recommended for increased efficiency.

No Signal off (AV source only)

The system will be automatically placed into the standby mode if no signal is received for 15 minutes.

1Press HOME MENU.

2Select “Power Control” (/ then ENTER).

3Select “No Signal off” (/ then ENTER).

4Select “Enable” (/ then ENTER).

Item	Description
Disable	Does not place the system into the standby mode
(default)
Enable	Places the system into the standby mode if no signal
	is received for 15 minutes

5Press HOME MENU to exit the menu.

Note

•Five minutes before the system is placed into the standby mode, a message appears every minute.

•The system may not be placed into the standby mode when

noise signals are present at the plasma display after a TV
program finishes.	59

En