Pioneer PRO-950HD manual Image position adjustment AV source only, Reducing video noise

Adjustments and Settings

Image position adjustment (AV source only)

Adjusts the horizontal and vertical positions of images on the plasma display.

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “Position” (/ then ENTER).

4Select “H/V Position Adjust” (/ then ENTER).

Position

H/V Position Adjust

Reset

5Adjust the vertical position (/) or horizontal position (/).

6Press HOME MENU to exit the menu.

Note

•To restore the factory defaults for all the items, press / to select “Reset” in step 4, and then press ENTER. A confirmation

screen appears. Press / to select “Yes”, and then press

ENTER.

•Adjustments are stored separately for each input source.

•Depending on the displayed video, the image position may not change even after adjustment.

Automatic image position and clock adjustments (PC source only)

Use Auto Setup to automatically adjust positions and clock of images coming from a personal computer.

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “Auto Setup” (/ then ENTER).

Option

Auto Setup

Manual Setup

• Auto Setup starts.

4Press HOME MENU to exit the menu.

Note

•When Auto Setup is finished, “Auto Setup completed.” appears.

•Even when “Auto Setup completed.” appears, Auto Setup may have failed, depending on conditions.

•Auto Setup may fail with a PC image composed of similar patterns or monochrome. If not successful, change the PC image and try again.

•Be sure to connect the computer to the plasma display and switch it on before starting Auto Setup.

•Depending on the displayed video, the image position may not change even after adjustment.

•This function is not selectable when the PC is connected to the HDMI terminal.

11

Manual image position and clock adjustments (PC source only)

Usually you can easily adjust the positions and clock of images using Auto Setup. Use Manual Setup to optimize the positions and clock of images when necessary.

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “Manual Setup” (/ then ENTER).

4Select an item to be adjusted (/ then ENTER).

Manual Setup
H/V Position Adjust
Clock	0
Phase	0
Reset

5Perform adjustment (/ or /).

•With “Clock” or “Phase” selected, you can change the parameter using /.

6Press HOME MENU to exit the menu.

Note

•To restore the factory defaults for all the items, press / to select “Reset” in step 4, and then press ENTER. A confirmation

screen appears. Press / to select “Yes”, and then press

ENTER.

•This function is not selectable when the PC is connected to the HDMI terminal.

Reducing video noise

For the individual analog TV channels, you can specify whether the plasma display should reduce video noise depending on the levels of broadcasting signals.

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “Tuner NR Setting” (/ then ENTER).

4Select “Channel Map” (/).

You can select only analog channels set by the Auto Channel Preset or POD.

5Select “Tuner NR” (/).

6Select “On” (/).

HTuner NR Setting ANT.A

	Channel Map		7
	Tuner NR		On
	Channel Keep/Skip		Keep
Item		Description
On (default)		Activates Tuner NR
Off		Deactivates Tuner NR

61

En