Pioneer PRO-950HD To specify the type of input signals, To specify the type of audio signals

Enjoying through External Equipment

To specify the type of input signals

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “HDMI Input” (/ then ENTER).

4Select “Signal Type” (/ then ENTER).

5Select “Video” or “PC” (/ then ENTER).

ItemDescription

Video (default) Select this option except when a PC is connected

PC	Select this option when a PC is connected to the
	HDMI input terminal

6Press HOME MENU to exit the menu.

Caution

•Make sure to select “PC” when a PC is connected to the HDMI input terminal.

Note

•In the “Video” mode, the image is “over-scanned” (enlarged), and the mode is automatically switched to “PC” when PC signals are received.

•In the “PC” mode, the image is displayed in full size for optimum image quality.

when “Video” is selected	when “PC” is selected
(“overscan” size screen)	(“underscan” size screen)

To specify the type of digital video signals

12

Note

•If you select a parameter other than “Auto”, make such a setting that results in natural color.

•If no image appears, specify another digital video signal type.

•For the digital video signal types to be specified, check the operation manual that came with the connected equipment.

To specify the type of audio signals

When you use the INPUT 4 or INPUT 5 HDMI terminal, select the terminal for the desired input source, then perform the following procedure to specify the type of audio signals.

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “HDMI Input” (/ then ENTER).

4Select “Audio” (/ then ENTER).

5Select the type of audio signals (/ then ENTER).

•If you select “Auto”, an attempt will be made to identify the type of audio signals when audio signals are received.

Item	Description
Auto (default)	Automatically identifies input audio signals
Digital	Accepts digital audio signals
Analog	Accepts analog audio signals

6Press HOME MENU to exit the menu.

Note

•If no sound is output, specify another audio signal type.

•For the audio signal types to be specified, check the operation manual that came with the connected equipment.

•Depending on the equipment to be connected, you also need to connect analog audio cables.

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “HDMI Input” (/ then ENTER).

4Select “Video” (/ then ENTER).

5Select the type of digital video signals (/ then ENTER).

•If you select “Auto”, an attempt will be made to identify the type of digital video signals when digital video signals are received.

Item	Description
Auto (default)	Automatically identifies input digital video signals
Color-1	Digital Component Video signals (4:2:2) locked
Color-2	Digital Component Video signals (4:4:4) locked
Color-3	Digital RGB signals (16 to 235) locked
Color-4	Digital RGB signals (0 to 255) locked

6Press HOME MENU to exit the menu.

67

En