Pioneer PRO-950HD manual Dialog Screen Message, Auto Connection Setup, Message Problem

12Enjoying through External Equipment

Setup

Software Update

To check whether the software needs to be updated or not.

Home Media Gallery must be connected to a USB device.

Connect the USB device and press the Next button.

Current Version: 1.x.xx

Next Cancel

1

Note

•Be sure to check that the version of the software has been changed by comparing with the one written down after updating the software (the procedure to check it is the same as above.). If it has not changed, the update may have failed. Please attempt the update again (the existing software can be used if the update fails). If you still cannot update the software after retrying, the file may have been damaged. Please return to the procedure for Downloading the software for update.

•On average, it may take 15 minutes or more to complete a software update.

•If you attempt a software update during the multiscreen mode, the single screen automatically returns.

“Auto Connection Setup”

For extra convenience, you can toggle between the following features:

“Last Connected When you check in the “Last Connected Server”

Server”box, the plasma display accesses the last server using WOL (“Wake On LAN”) first as the Media Navigator is selected from the Home Media Gallery. The Media Navigator displays the last server when WOL succeeds, while a server list is displayed when WOL fails.

WOL is activated to turn the last accessed server On if the server is WOL-compliant and is in Standby or sleep mode.

“Single Server/ This function is used only when a USB flash drive

USB”or a single server is connected. You do not need this function when a multi-card reader, or two or more servers are connected.

USB:

•When USB flash drive is connected, the Devices List is skipped as long as you have checked in the “Single Server/USB” box. If not, the list may

be displayed at any time. Media Navigator (Server):

•When a single server is connected, the Server List is skipped as long as you have checked in the “Single Server/USB” box. If not, the list may be displayed at any time. When the “Last Connected Server” box is checked, the other server setup option – “Single Server/USB” – becomes invalid.

86

Setup

Auto Connection Setup

Last Connected Server

Single Server/USB

	OK	Cancel
			1
Dialog Screen Message
No.	Message		Problem
001	Content playback failed		No details are available
	(001).		for the error
100	A communication error		No further details are
	occurred (100).		available for the error
101	No response from the		Timeout period reaches
	server (101).		due to delayed server
			response
102	Disconnected from the		Cables are
	network (102).		disconnected
103	Invalid response was		Invalid response from
	received from the		the server
	server (103).
300	This format is not		A file that is not
	supported (300).		supported is selected
500	Authorization failed		Failed to obtain
	(500).		WMDRM authorization
501	Authorization failed		Failed to obtain
	(501).		WMDRM authorization
503	Authorization failed		Failed to obtain
	(503). Please check for		WMDRM authorization
	trouble in routers,
	hubs, and other
	network devices.
504	Authorization failed		Failed to obtain
	(504). The maximum		WMDRM
	allowed number of
	devices are connected
	to the server.
505	Authorization failed		Failed to obtain
	(505). The content		WMDRM authorization
	license is off. Please
	turn on the license
	from the server.

•The message consists of “Error”, “Warning” and “Information” and is displayed for 5 seconds.

Displaying pictures in the Home Media Gallery for an extended period may cause an after-image.

En