Pioneer PRO-950HD manual Using the Hdmi Control menus

Using the HDMI Control

Note

•If you have selected “Off” in step 5, a message “Operations cannot be carried out. Confirm the HDMI control settings.” appears when HDMI CONTROL is pressed on the remote control unit.

•If you operate an HDMI supported device(s) using an HDMI terminal other than the terminal selected in “Input Setting”, a malfunction may occur. When connecting to any HDMI terminals other than the terminal selected in “Input Setting”, make sure to enter the settings of the external device(s) so that the HDMI Control function does not operate.

Selecting the Power Off Control

You can select whether or not the connected device is turned Off when the plasma display is turned Off.

(factory default is “On”)

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “HDMI Control Setting” (/ then ENTER).

4Select “Power Off Control” (/ then ENTER).

5Select “On” (/ then ENTER).

6Press HOME MENU to exit the menu.

Note

•The “Power Off Control” function is valid for the devices connected to any of HDMI terminals at the rear of the plasma display.

Selecting the Power-On Ready

You can select whether or not the plasma display is turned On when the connected Pioneer recorder or player is turned On and images are input to the plasma display.

(factory default is “On”)

1Repeat steps 1 to 3 in Selecting the Power Off Control.

2Select “Power-On Ready” (/ then ENTER).

3Select “On” (/ then ENTER).

4Press HOME MENU to exit the menu.

Selecting the Hold Sound Status

You can select whether or not the function is held for the connected Pioneer AV system even if the system is placed into standby during HDMI Control operations.

(factory default is “Off”)

1Repeat steps 1 to 3 in Selecting the Power Off Control.

2Select “Hold Sound Status” (/ then ENTER).

3Select “On” (/ then ENTER).

4Press HOME MENU to exit the menu.

Power On/Off Test

You can confirm if the Power On/Off control function is effective between the plasma display and the connected device.

1Repeat steps 1 to 3 in Selecting the Power Off Control.

2Select “Power On Test” or “Power Off Test” (/ then ENTER).

A list containing devices appears when multiple HDMI devices are connected to the HDMI terminals.

13

3Select the desired device (/ then ENTER).

4Press HOME MENU to exit the menu.

Note

•Devices that can be checked for Power On/Off Test are those connected to HDMI terminals as set in “Input Setting”.

•If the Power On/Off Test fails, check for the connection and setting.

Using the HDMI Control menus

You can enjoy various functions with the connected Pioneer recorder, player or AV system that supports the HDMI Control functions by selecting and using the corresponding HDMI Control menus.

1Press HOME MENU.

2Select “HDMI Control” (/ then ENTER).

The HDMI Control menu is displayed.

HDMI Control

Disc Navigator

CTRL Panel(AV-SYS)

Playback CTRL Panel

Switch to AV Sound

HDMI Control menu

Item	Description
Disc Navigator	Displays a title list of the connected recorder or player
CTRL Panel	Displays the control panel for the connected AV system on
(AV-SYS)	the plasma display
Playback CTRL	Displays the control panel for the connected recorder or
Panel	player on the plasma display
Switch to AV	Switches between the plasma display and the connected AV

Sound (Switch to system to which sound is output

PDP Sound)

Note

•To use the HDMI Control functions, a Pioneer recorder, player or AV system that supports the HDMI Control functions is required.

•Not all operations may be controlled for the connected devices.

•The HDMI Control menu is not selectable when “Off” is selected in “Input Setting” for the “HDMI Control Setting” menu.

•The CTRL Panel (AV-SYS) menu is only available when the sound is output from the AV system.

•The Playback CTRL Panel menu is selectable when the connected recorder or player is ready to operate.

•You can also display the HDMI Control menu by pressing HDMI CONTROL on the remote control unit of the plasma display.

91

En