Using the TV’s Menu System
Auto Color
Auto Color minimizes the flesh tone variations of the TV picture. The Auto Color setting can be stored for each input. Choose On or Off, depending on your preference.
Color Warmth
Color Warmth automatically adjusts the color temperature of the picture. Color Warmth can be stored for each input. The feature lets you set one of three automatic color adjustments:
•Cool for a more blue palette of picture colors.
•Normal for an ordinary picture color.
•Warm for a more red palette of picture colors.
Noise Filter
Noise Filter displays a list that lets you set one of the three settings that allows you to reduce picture “static” or any type of interference. A Noise Filter setting can be stored for each input. You can set the Noise Filter to Frame Comb, Off or Adaptive. The settings are explained in the
Convergence
The Convergence feature lets you adjust the TV’s three tubes. When the TV tubes’ images are precisely aligned, they create the color images you see on the screen. Over time, the picture can drift out of alignment (this is normal). If your picture seems fuzzy or has a yellow tint, using Convergence could correct this misalignment.
Note: Make sure the TV has been on for at least 30 minutes (TV needs to warm up for best results) before starting Auto Converge or Red/Blue Centering.
When you select the Convergence feature, a submenu appears with three options:
•Auto Converge automatically aligns the projection lenses to
Note: After performing auto convergence, use the Blue Centering and Red Centering menus to fine tune convergence in the center of the screen, if necessary.
•Blue Centering aligns the blue and green images to fine tune the picture.
•Red Centering aligns the red and green images to fine tune the picture.
Note: The ability to change channels is disabled when adjusting the convergence options. The TV must be tuned to a usable signal to converge the picture.
Chapter 4 | 57 |