RCA HD65W40 manual Center Speaker Input

Connections & Setup

CENTER CHANNEL INPUT

INTERNAL		MAXIMUM AMPLIFIER POWER RATING
		(60 WATTS into 8 OHMS)
SPEAKER
SOURCE
TV	EXT AMP

TV’s CENTER CHANNEL INPUTS

Caution: Do not connect the A/V receiver’s CENTER CHANNEL output to the TV’s EXTERNAL SPEAKERS terminals. Damage to TV may occur.

VIDEO

INPUT 1

V

S-VIDEO

L/MONO

R

AUDIO

INPUT 1

VIDEO
INPUT 3
V	PR
L/MONO	PB
R	Y
AUDIO
INPUT 3

Tips

Inputs 3/4 can be used as either a component video (Y PB PR ) input or a composite video (V) input. The TV auto detects the connection with Y PB PR having highest priority.

PIP cannot be displayed from component (Y•Pb•Pr) inputs.

CENTER SPEAKER INPUT

•INTERNAL SPEAKER SOURCE - TV / EXT AMP Switch

-TV Position Sound comes from TV’s internal speakers.

-EXT AMP Position Internal speakers are used for an external center channel. When an external audio/video receiver’s center channel output is connected to the TV’s center channel input, center channel audio comes out of the TV’s internal speakers.

• CENTER CHANNEL TERMINALS Connect the audio/video receiver’s

center channel output to the TV’s center channel input. Switch the INTERNAL SPEAKER SOURCE to EXT AMP position.

VIDEO/AUDIO INPUTS

VIDEO INPUT 1/AUDIO INPUT 1 Connect an NTSC (analog) component.

•V (VIDEO) provides composite video connection and connector is usually yellow.

•L/MONO AUDIO provides left audio connection and connector is usually white.

Note: If your component has only one output for audio (mono), connect it to the left (white L/Mono) audio jack on the TV and don’t connect the right audio part of the cable.

•R AUDIO provides right audio connection and connector is usually red.

•S-VIDEO lets you connect an S-Video cable for better video quality picture to a component with S-Video capability, such as a VCR or DVD player. When using S-Video, make sure to connect the two audio cables as well as the S-Video connector.

VIDEO INPUT 2/AUDIO INPUT 2 Provides connection to a second NTSC (analog) video component such as a VCR. The jacks are as described for INPUT 1.

VIDEO INPUT 3/AUDIO INPUT 3 Connect an optional component (Y PB PR) video source, such as a DVD player or satellite receiver. Note that it is essential to match the color coded connectors between a compatible component and the TV.

•	AUDIO R/L/MONO The audio jacks provide stereo sound. When connected,
	audio volume from the main front and rear speakers are variable.
•	V (VIDEO) provides composite video connection and connector is usually yellow.
•	Y PB PR Unlike a single video input, component video maintains the video
	signal as three separate parts through these three jacks. To ensure
	maximum picture quality, use three video-grade cables for the Y PB PR
	connections. Accepts 480i, 480p, 1080i signals. Has priority over V
	connection.

VIDEO INPUT 4/AUDIO INPUT 4 Provides connection to a second optional component video source, such as a DVD player or satellite receiver. The jacks are the same as described in INPUT 3.

16 Chapter 1