Using the TV’s Menu System
SAP (Second Audio Program)
When turned on, Second Audio Program plays the program’s audio in a second language, if one is available. SAP is also used to broadcast a program’s audio with descriptions of the video for the visually impaired. Or, SAP might contain audio which is totally unrelated to the video.
Note: SAP is broadcast in mono and is only available for analog programs, not digital programs.
Balance
The Balance setting applies to the internal speakers, rear external speakers and the headphone output. Balance does not affect the internal subwoofer nor any other audio output. Balance is how much audio (loudness) gets sent to the left and right speakers.
Fixed/Variable Out
The Fixed/Variable Out menu displays a choice list that lets you turn the TV’s front internal and external speakers on or off and set the Fixed/Variable audio output to a fixed- or
•Variable Output, Speakers On This setting turns the TV’s front speakers On and allows variable output from the TV’s Fixed/Variable Audio Output jacks. Use this setting if the TV is not connected to an audio receiver or amplifier and the volume is controlled by the TV.
•Variable Output, Speakers Off This setting turns the TV’s front speakers Off and allows variable output from the TV’s Fixed/Variable Audio Output jacks. Use this setting if the TV is connected to an audio receiver or amplifier and the volume is controlled by the TV.
•Fixed Output, Speakers Off This setting turns the TV’s front speakers Off and provides fixed output from the TV’s Fixed/Variable Audio Output jack to a receiver or amplifier. With the Fixed Output, the TV’s volume control, graphic equalizer, and mute are disabled. This output is ideal when connecting to an audio receiver or amplifier that has its own remote control for controlling the volume.
Note: If the Internal Speaker source switch on the back of the TV is set to EXT AMP, it overrides any above setting of Speakers Off and allows the internal speakers to be used as a center speaker input.
Digital Audio Out
If you’ve connected a
•Auto Select If selected, your TV automatically chooses between Dolby Digital and PCM based on the audio signal it is receiving. This is the best selection if you have a Dolby Digital* and PCM decoder that was manufactured in the last several years.
• PCM (Pulse Code Modulation) If selected, the TV sends all signals through the Digital Audio Output in PCM.
60 | Chapter 4 |