FIRST THINGS FIRST
CONNECTION B | TV |
| |
VERY GOOD PICTURE AND SOUND QUALITY |
|
To use this connection you must have: |
|
• TV with separate RF and audio/video inputs (jacks) | DSS |
RECEIVER | |
• VCR with RF and audio/video inputs |
|
• Coaxial and audio/video cables |
|
To connect TV, VCR and antenna or cable box:
IN
VIDEO RAUDIO L
SATELLITE
DISH
OUT TO TV |
|
|
|
|
| VIDEO | R | L |
|
|
| AUDIO |
|
|
IN FROM ANT CH4 | VIDEO | R | SATELLITE IN | CABLE |
CH3 | L | OR | ||
|
| AUDIO |
| |
|
|
|
|
VCR
1.Connect coaxial cables as shown.
2.Connect audio/video cables as shown.
To receive DSS® programming:
1.Tune TV to receive line output from DSS® receiver (often called Input 1).
2.Tune DSS® receiver to desired channel.
To receive off-air programming (no cable box):
1.Turn off VCR and DSS® receiver.
2.Tune TV to desired channel.
CH3
CH4
IN FROM ANT VIDEO IN AUDIO IN
R L OUT TO TV VIDEO OUT AUDIO OUT
To receive off-air programming (with cable box):
1.Turn off VCR and DSS® receiver.
2.Tune TV to cable box output channel (usually CH2, CH3, or CH4).
3.Tune cable box to desired channel.
To record DSS® programming:
1.Tune TV to record line output from DSS® receiver (Input1).
2.Tune DSS® receiver to desired channel.
3.Set your VCR to record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
CAUTION
Do not stack electronic components or other objects on top of the DSS® receiver. See Safety Information, inside front cover.
11