THE MENU SYSTEM
2. Select a device you would like to control.
Keep track of devices by assigning a label.
3.Complete the
4.Use the arrow buttons and MENU•SELECT to select the house and module codes that match the device’s remote module. Select Save Setup to complete the setup.
Once the device is set up, there are two ways to control it. Select a device from the Home Control menu screen. You can turn it on and off, or schedule a timer that controls the device automatically.
Schedule a timer by completing the
Complete the
1.Use the arrows and MENU•SELECT to enter an on and off time.
2 Point to and select Run Timer.
If you want to change a device, select Edit Setup.
You can schedule several timers to control the same device at different times.
53