Panasonic DMR-EZ47VEB Setting the Channels and Clock, To turn the unit on, Tips, Preparation

Power Save

On

Off

On: Minimise standby power consumption, without Quick Start function and AV2 loop-through in standby.

Setting the Channels and Clock

Preparation:

Turn on the mains for the television

(and connected equipment) and select the appropriate AV input to suit the connections to this unit.

These are the first settings you make upon

buying the unit. You don’t need to make
these settings again.	TV’s remote control

DVD/VHS

￿to turn the unit on.

DVB Auto-Setup starts. The unit will search		DVB Auto-Setup
for the terrestrial digital channels. This takes	Prog. Channel		Service Name	Net ID TS ID		Quality
	Please wait!		Ch 21			68
about 5 minutes.	2	23	BBC	12302	12289	9
	1	23	BBC ONE	12302	12289	9
– TV channels are sorted and stored in
channel numbers order sent by the	RETURN: to cancel
broadcasters and cannot be changed.	RETURN

Power Save Function: ,  to select “On” or “Off” then OK

	SELECT		Off: With Quick Start
–Set to “On” to reduce power	OK		function and AV2 loop-through
		RETURN	in standby.
consumption in standby mode.

–Refer to the following chart for the Power Save function features when the unit is turned off.

Power Save	On	Off
Power consumption	Approx. 2.2 W	Approx. 13.4 W
Watching the picture from the
satellite receiver connected	Can not do	Can do
to the AV2 input terminal
Startup time	Not quick	Quick*

*e.g., TV Guide is displayed within 1 second after [GUIDE] is pressed.

When setup has completed, the confi rmation screen appears.

OK

The Owner ID settings screen appears.

and press the numbered buttons to enter your choice of a 4-digit PIN number.

		Owner ID
Make a note of the PIN number (don’t		PIN number	￿￿￿￿
		Name
forget), as it is not possible to return to		House No.
		Postcode
the factory preset.	RETURN
		RETURN : leave

OK to store the PIN number.

10

DVD/VHS

￿￿ TV￿

		VOL
	CH
DRIVE

SELECT AV

TRACKING/V-LOCK/PAGE

1 2 3

CH

￿ 4 5 6

78 9 PROG/CHECK

DELETE

0

MANUAL SKIP

INPUT

SELECT

RESET

SLO

W/SEARC

H

SKIP/INDEX

PAUSE

REW

FF

STOP

PLAY

STATUS

EXIT

￿

I

G

U

D

E

			O	R	F
		T			U
					C
	A				N
					T
￿￿	IG				I
	A				O
	V				N
	N			OK
					M
	E				E
10 ￿	R				N
	I				U
	D
	OPTION				RETURN
11				CREATE
				CHAPTER

Tips

To abort Auto-Setup

Press [RETURN].

If the unit displays “No stations found !” Press [] to select “No” and press [OK]. Go to step . After you have performed steps -, turn off the unit and confi rm the cable or aerial input is connected to

the RF IN terminal. Restart the Auto- Setup again (¼ 59).

If the clock setting menu appears or

the clock is not correct, set the clock manually (¼ 11).

Restarting the Auto-Setup (¼ 59)

When turning on the Power Save function, if the unit is turned off, unit’s display is also turned off.

To correct the PIN number

1.Press [, ] to select the digit.

2.Press the numbered buttons to enter the digit.

RQT8857