Panasonic DMR-EZ47VEB Basic Connection, Use of the supplied RF coaxial cable, Pin Scart terminal

Basic Connection

Use of the supplied RF coaxial cable

To prevent interference patterns from appearing on your TV, use only the supplied RF coaxial cables when you connect this unit to your TV and aerial outlet or aerial cable and Satellite receiver.

Keep the RF coaxial cables as far away as possible from other cables.

Do not roll up the RF coaxial cables.

Before connection, turn off the mains for all connected equipment and read the appropriate operating instructions.

Be sure to read the Caution for AC Mains Lead on page 3.

Connecting to a Television only

To household mains socket

AV

RF IN

Step

4

To household
mains socket
				COMPONENT
							OUT
					VIDEO OUT
					Y	VIDEO				AV 1
										(TV)
									OUT
					PB	L		S VIDEO
						AUDIO				AV 2
					PR
			OPTICAL			R				(EXT)
	AC IN
		DIGITAL	AUDIO OUT
		(PCM/BITSTREAM)

Step	Rear of this unit
4

Rear of TV

Step
	Step
3
	2

RF

IN

RF

OUT

The RF coaxial cable cannot be used for showing pictures from the unit. The unit must be connected using another method, e.g. 21-pin Scart cable to show pictures from the unit on the television set.

Use one of the RF coaxial cable (black or grey) to connect this unit’s RF IN terminal to your aerial socket or aerial cable.

To the aerial	RF coaxial cable (supplied, grey)
	Step

1

or

RF coaxial cable (supplied, black)

Step

1

To this unit

RF

IN

Connections other than the 21-pin Scart cable 67–69

RF coaxial cable (supplied) from the aerial socket or aerial cable to the “RF IN” on the unit.  RF coaxial cable (supplied, black) from the “RF OUT” on the unit to the “RF IN” on the TV.  21-pin Scart cable (not supplied) from the “AV1 (TV)” on the unit to the “AV” on the TV.

 AC mains lead (supplied) from the “AC IN~” on the unit and the TV to a household mains socket.

After completing the above connections, proceed to the TV Tuning (¼ 10).

21-pin Scart terminal

The 21-pin Scart terminal transmits both input and output signals for picture and sound. TVs equipped with the same type of terminal can be connected here.

This type of terminal is also called Peritel, Euro Connector and Euro AV.

When the unit is connected to a Q Link- compatible TV with a fully wired 21-pin Scart cable, You can use convenient functions of Q Link.

1 3 5 7 9 11 13 15 17 19

21

2 4 6 8 10 12 14 16 18 20

8

AV1 Scart terminal (TV)		AV2 Scart terminal (EXT)
1	Audio output CH2 (R)	1	Audio output CH2 (R)
2	Audio input CH2 (R)	2	Audio input CH2 (R)
3	Audio output CH1 (L)	3	Audio output CH1 (L)
4	Audio ground	4	Audio ground
5	Blue ground	5	Blue ground
6	Audio input CH1 (L)	6	Audio input CH1 (L)
7	Blue output	7	Blue input
8	Switching voltage output	8	Switching voltage input
9	Green ground	9	Green ground
10	Q Link control signal	10	Reserved
11	Green output	11	Green input
12	Reserved	12	Reserved
13	Red ground	13	Red ground
14	Blanking ground	14	Blanking ground
15	Red output/chrominance output	15	Red input/chrominance input
16	Blanking output	16	Blanking input
17	Video output ground	17	Video output ground
18	Video input ground	18	Video input ground
19	Video output/luminance output	19	Video output
20	Video input	20	Video input/luminance input
21	Ground	21	Ground

RQT8857