Panasonic DMR-EZ47VEB quick start Recording from an External Device

Page 24
INPUT
SELECT

Recording from an External Device

Recording from a VCR, etc.

Recording to DVD

Connect cables while both the unit and the external device are turned off.

Front of the unit

IN 2 S VIDEO VIDEO L /MONO AUDIO R

AV3 IN

S VIDEO VIDEO L /MONO AUDIO R

You can get a

 

sharper, clearer

 

picture by connecting

 

with an S Video cable

 

instead of the yellow

Yellow White Red

video cable.

S Video cable

Audio/video

 

cable

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Perform steps left.

Start play on the external device.

REC

at the point you want to start recording to the disc.

Recording to VHS

[VHS]

Perform steps left.

PLAY

to bring the tape to the point at which you want to start recording from.

Preparation:

Turn on the unit.

[RAM] If the disc is protected, release protection (¼ 56).

[VHS] Ensure accidental erasure tab is intact.

When the output signal from the external device is

NTSC, change the “TV System” to “NTSC” in the Setup menu (¼ 63).

This unit cannot record NTSC signals to discs that already have PAL signal recordings.

To reduce noise in input from a video cassette

recorder, set “Copy NR” to “On” in the on-screen display (¼ 55).

DRIVE

SELECT to select the DVD or VHS drive.

–Insert a disc or video cassette with enough remaining blank space (¼ 72, 74).

REC MODE

to select the recording mode (¼ 20).

to select the input where your external device is connected.

– Front panel inputs are AV3.

PAUSE

when you reach that point.

REC

to put the unit in recording standby.

Start play on the external device.

PAUSE

to start recording at the point you desire.

Notes

When timer recording starts while recording from an external device, timer recording takes priority and recording from the external device stops.

Tips

You can also connect to the AV2 on the rear.

If the audio output of the external device is monaural, connect to L/MONO on the AV3 input terminals at the front.

To skip unwanted parts

Press [PAUSE] to pause recording. (Press again to restart recording.)

To stop recording

Press [STOP].

24

RQT8857

Image 24
Contents RQT8857-B Region number supported by this unitExample Features Linked timer recordings with external equipmentJust one cord and simple connection with Hdmi terminal You can easily select and play recorded programmesAccessories How to replace the fuseSales and Support Information Before useTable of Contents Quick Start GuideRemote Control Information Using the remote controlAbout batteries QuickRemote Control Location of Parts/ControlsMain Unit Unit’s Display Rear PanelCommon to DVD/VHS Connecting to a Television only Basic ConnectionUse of the supplied RF coaxial cable Pin Scart terminalUsing a fully wired 21-pin Scart cable Rear of satellite receiverTo view satellite programmes To record satellite programmesSetting the Channels and Clock Power Save Function ,  to select On or Off then OKTo turn the unit on Tips,  to change the setting Clock Setting to select Yes, then OK ,  to select the item you want to changeWatching Television ,  to select the current programme, then OKTo select desired channel To directly enter ChannelsStopping Play Pausing Play PlaybackTo select the VHS drive Insert a cassette. ¼To select the recording mode Pausing RecordingRecording Television Programmes To start recordingTimer Recording To cancel a timer recording programming,  ,  to select the future programme, then OK To check programmes ¼Copying Titles Seconds− or − To copy without fi nalisingWhen you start copying from the selected title Copying Titles DVD ¼VHSDeleting Titles To select the DVD drive,  to select Delete, then   to select Delete, then OKImportant Notes for Recording Broadcast in multi-channel soundDisc must be finalised after recording or copying ¼ Advanced Recording DVD Recording Modes and DurationsVHS Recording Modes and Durations Repeatedly until the desired time is reached To start fi nalising. orNalising To select the DVD or VHS,  to select To Others then Flexible RecThen OK , , ,  to select Start, then OKRecording from a Satellite Receiver Satellite receiver you have connectedSelect to select the DVD or VHS Drive Manual RecordingRecording from an External Device When DV Auto Rec screen does not appear  to select Rec to DVD, then  to select Rec, then OKRecording from a DV Camcorder DV Auto RecAdvanced Timer Recording Manual timer recordingsTo exit the timer recording list Programme ¼ right, TipsTo cancel a timer recording in progress  to select Stop Recording, then OK,  to select the programme While the unit is on Timer Recording screen icons To deleteTo modify the programme , ,,to make changes, then OK Check, Change, or Delete ProgrammesMake timer programming on the TV Making timer recordings on the televisionTo turn the unit off Start and end of recording is controlled by TVWhat is TV Guide? Using the TV GuideTV Guide Yellow to display the list Programme typeBlue to display the list CategoriesAdvanced Disc Playback , , , to select an item, then, , ,  to select the title you want to watch, then OK Press and hold,  to select the time, then Playing Still Pictures Jpeg , , ,  to select a picture, then OK,  to select the desired folder, then OK , , ,  to select Folder,  to select Rotate Right or Rotate LEFT, then OK ,  to select Zoom in, then OKRotate Pictures Picture Properties ZoomUsing the Tree Screen to Find a Group Playing MP3s,  to select a track, then OK to play  while a track is highlighted to display the tree screenAdvanced Video Cassette Playback To fast-forward the tapeTo rewind the tape Press and hold for about 2 secondsPress and hold for about 5 or more seconds Press and hold until the picture noise disappearsSimultaneously Press and hold until the shaking stopsTo display on-screen indicators Changing Audio during Playback On-screen Display IndicatorsTo exit on-screen indicators Audio changes as followsInformation Messages Status to show the screen informationTo show the Digital Text To show subtitlesNew Service Message Function Menu WindowStatus Keep pressing to cycle through available displays ,  to select a menu item, then OKWhen the TV is on When the TV is offPower on link Easy playbackEasy control only with Viera remote control Using the ControlSelect an item, then OK PanelAccessing the Title View Entering TextTitles-Editing Title Operations Change Thumbnail Divide TitleAccessing the Chapter View Chapters-Creating, EditingChapter Operations Accessing the Playlist View Creating, Editing and Playing PlaylistsCreating Playlists Editing Playlists/ChaptersEdit Chapter ViewPress Exit You can go back to the Playlist ViewCopying Titles Advanced  Register titles and playlists for copy On the nextCancel all registered copying setting and lists Edit the copying listCopying list icons and functions DVD-V  VHS  Press ,  to select Start Copying, then press OKSetting On-Screen Display Accessing the On-Screen DisplayMenu Setting Disc MenuPlay Menu Sound Menu Picture MenuOther Menu Accessing the Management Menus DVD ManagementMessage appears when finalising is finished The first layer cannot be closed when there is noFinalising Create Top MenuSetup Menu Channel SettingsAccessing the Setup Menu TuningAuto-Setup Restart Add New DVB ServicesDVB Manual Tuning Signal ConditionPlayback/Recording Settings Picture SettingsDisc PictureSound Settings SoundDisplay and Connection Settings DisplayConnection Hdmi Settings1 AV2 SettingsTV System Hdmi Video Format2VHS and System Settings OthersOther Settings Using the Unit’s Remote Control to Operate the TVChild Lock Additional Connections DVD output and DVD/VHS outputDVD/VHS common out DVD priority outUsing an Audio/Video Cable Using Component Video CablesRed White Yellow  If you have a regular television CRT cathode ray tubeUsing an Audio Cable for Better Sound Using an Optical Digital Audio Cable for Better SoundRear of Amplifier or System Component Red WhiteConnecting to a TV Connecting to a TV and a ReceiverRegarding Viera Link Hdavi ControlTM function Disc Handling Usable Discs for Recording and Playback Can do, Cannot do Play-only Discs Discs that Cannot be PlayedTypes of disc for the type of connected TV 1 PAL60Inserting Discs Disc CareMP3s and Still Pictures Jpeg MP3 File InformationStill Picture JPEG2 Information Video Cassette Handling To ejectInserting a Video Cassette Video Cassette InformationTroubleshooting Guide To Reset This UnitTo reset the unit’s settings To reset the ratings level settingsGeneral Issues PowerFollowing does not indicate a problem with the unit Display is dim  Change FL Display in the Setup menuOperation Connecting the unit TV GuideViera Link DVB-TPlayback Issues PictureSound TV. Using , return to the beginning of the title Cover Check the Sqpb setting VHS PictureVHS Sound VHS PlayRecording Issues Recording/Timer Recording/Copying/External inputVHS Recording Editing Issues Language code listFrequently Asked Questions SetupDiscs Recording TV GuideStands for a number Code on the remote control  The unit is performing a software updateMessages On the Unit’s DisplayOn the TV HoldCleaning the video heads To clean this unit, wipe with a soft, dry clothUnit Care Glossary Safety Precautions Specifications UHFThis Unit is Intended for USE in Moderate Climates For business users in the European UnionIndex RQT8857-B