Panasonic DMR-EZ47VEB Using a fully wired 21-pin Scart cable, Rear of satellite receiver

Using a fully wired 21-pin Scart cable

–You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (¼ 42).

–You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.

“AV1 Output” in the Setup menu is set to “RGB 1 (without component)” or “RGB 2 (without component)” (¼ 63)

–“AV2 Input” settings in the Setup menu (¼ 63)

Before connection, turn off the mains for all connected equipment and read the appropriate operating instructions.

Be sure to read the Caution for AC Mains Lead on page 3.

Adding a Satellite Receiver: Connecting to a Television and a Satellite Receiver

Start Guide STEP 2

To household mains socket

AV

Step

6

RF IN

Rear of TV

Step

4

The RF coaxial cable cannot be used for showing pictures from the unit. The unit must be connected using another method, e.g. 21-pin Scart cable to show pictures from the unit on the television set.

Step

3

Quick

To household
mains socket
				COMPONENT
							OUT
					VIDEO OUT
					Y	VIDEO				AV 1
										(TV)	RF
											IN
									OUT
					PB	L		S VIDEO
						AUDIO				AV 2	RF
					PR
			OPTICAL			R				(EXT)	OUT
	AC IN
		DIGITAL	AUDIO OUT
		(PCM/BITSTREAM)

Step
	Rear of this unit
6

Step

5

To household mains socket

		AV
	satellite antenna	RF OUT RF IN
		Rear of satellite receiver
Step

Step

2To the aerial

Step

1

6

Connections other than the 21-pin Scart cable 67–69

RF coaxial cable from the aerial to the “RF IN” on the satellite receiver.

RF coaxial cable (supplied, black) from the “RF OUT” on the satellite receiver to the “RF IN” on the unit.

RF coaxial cable (supplied, black) from the “RF OUT” on the unit to the “RF IN” on the TV.  21-pin Scart cable (not supplied) from the “AV1 (TV)” on the unit to the “AV” on the TV.

 21-pin Scart cable (not supplied) from the “AV” on the satellite receiver to the “AV2 (EXT)” on the unit.

 AC mains lead (supplied) from the “AC IN~” on the unit, the TV and the satellite receiver to a

household mains socket.

After completing the above connections, proceed to the TV Tuning (¼ 10).

To view satellite programmes

Refer to “Watching Satellite Programmes” (¼ 12)

To record satellite programmes

Refer to “Recording from a Satellite Receiver” (¼ 23)

9

RQT8857