@0Alternate Button ALT | Panasonic WV-CU550CJ specs

!8Decrement Button (DEC –1CAM)

When a sequence running in forward direction has been paused with the STOP button, pressing this button will move the sequence one frame to the previous step (in forward run direction). If the sequence was running in reverse direction, the button will move the sequence one frame to the previous step (in reverse run direc- tion).

This button is also used to select a camera. Pressing this button will replace the currently selected camera with the next lower camera number, if the active monitor is in Spot mode.

!9Auxiliary Button (AUX 1, 2)

These buttons toggle the auxiliary switches in the Receiver on and off.

The auxiliary switches can be used, for example, to activate equipment connected to the receiver, such as lamps and buzzers.

@0Alternate Button (ALT)

This button activates the alternate function of dual-func- tion control buttons.

@1Forward Sequence Button (FORWARD SEQ)

This button is used to run a selected Program or Tour Sequence in forward direction on the active monitor.

It also restarts a sequence forward from the step that was previously paused by pressing the Stop button.

@2Backward Sequence Button (BACK SEQ)

This button is used to restart a sequence backward from the step that was previously paused by pressing the Stop button.

@3Alarm Acknowledge and Reset Button (ACK RESET)

This button cancels an activated alarm. To cancel an alarm, first select the alarmed monitor(s), then press the ACK RESET button once for alarm acknowledgment (the indicator on the button blinks rapidly), and finally press it again for alarm reset (the indicator goes off).

After an alarm acknowledgment, pressing this button while the Alternate (ALT) indicator is on will cancel all currently activated alarms at the same time.

@4Data Ports (DATA IN, OUT)

Exchanges control data with the WJ-SX550C Matrix Switcher in a system.

@5Termination Switch (TERM ON/OFF)

This switch enables termination of the controller’s data port.

@6Controller Unit Number Switch (CONTROLLER UNIT

NO.)

This switch is used to identify the unit number of the System Controller in multiple system controller applica- tions. Up to eight controllers can be installed in a sys- tem.

@7Mode Selection Switch (MODE)

These switches are used to set the mode of the System Controller connected to the Matrix Switcher. Set the switches as shown below.

MODE

Normal Mode

ON 1 2 3 4

MODE

CAM-P Mode

ON 1 2 3 4

@8Controller On/Off Switch (CONTROLLER ON/OFF)

This switch is used to turn the WV-CU550CJ system controller power on and off.

@9Power Cord

NOTE

Refer to the Operating Instructions of the WJ-SX550C Matrix Switcher for further details.

WV-CU550CJ specifications

The Panasonic WV-CU550CJ is a cutting-edge controller designed for efficient management and operation of video surveillance systems. This device is highly regarded for its user-friendly interface, which simplifies the management of various CCTV cameras and components.

One of the main features of the WV-CU550CJ is its ergonomic design, facilitating ease of use during extended periods. The controller is equipped with a joystick that offers precise control over camera movements, allowing users to pan, tilt, and zoom (PTZ) with remarkable accuracy. This functionality is essential for monitoring large areas and ensuring that no critical activity goes unnoticed.

The WV-CU550CJ supports a variety of communication protocols, including Pelco D and Pelco P, which makes it compatible with a wide range of CCTV equipment. This versatility not only enhances its functionality but also enables seamless integration into existing surveillance systems. The controller can manage up to 256 cameras, accommodating the needs of larger installations in various sectors such as transportation, retail, and public safety.

In terms of technologies, the WV-CU550CJ incorporates advanced digital signal processing to ensure high-quality video transmission. Users can monitor multiple cameras simultaneously, and the device supports programmable presets, which allow for automatic movements to predefined positions. This feature is particularly useful for covering critical zones, as it reduces the operator's workload while maintaining surveillance efficacy.

Additionally, the WV-CU550CJ includes built-in functionality for managing alarm inputs and outputs, providing an extra layer of security by allowing the controller to react to specific triggers, such as motion detection. The device's compact form factor makes it suitable for desk-mounted or rack-mounted setups, catering to different operational environments.

Equipped with a comprehensive manual and intuitive layout, the WV-CU550CJ is designed to minimize the learning curve for new users while ensuring operational efficiency for experienced professionals. The combination of robust features, compatibility, and ease of use positions the Panasonic WV-CU550CJ as an essential asset in modern surveillance systems, ensuring enhanced security and peace of mind for users.