SD cards
Playing SD cards
Do not remove the card or turn off the unit while the card is being read from (“Card Reading…” is on the display) or the unit is using the card. This can corrupt your data.
pYou can use SD Memory Cards with capacities from 8 MB to 2 GB (➜ page 11). pWhen you insert a SD card while the unit is on, playback starts automatically.
1 Insert the card. Open the cover.
Headphone terminals [ ]
3.5 mm (1/8S) stereo mini plug
Insert the card.
Playing
Press on the center of the card until it clicks into place.
Label side
pIf you are using a miniSDTM card,
insert it into the | ADAPTER |
miniSDTM card adaptor that comes with the card. Insert and remove this adaptor from the unit.
Close the cover.
| AV SELECT |
| VOLUME |
TOP MENU | 1 |
|
2Press and hold until the power comes on.
Play begins automatically
| p When playing a SD card that contain both “Picture” and |
| “Video ” content, “Picture” content will be played first. |
ON | |
| p [SD\VIDEO] Adjust the volume. |
| When “AUX” or “DISC” is displayed, press |
| [AV SELECT] several times until “SD” is displayed. |
w To change content | SD Card Menu |
TOP MENU | Picture |
|
Video
to select and press ENTER
Press to display Press [ ] to select “Picture” or “Video” “SD Card Menu”. and press [ENTER].Play begins.
pWhile stopped, the unit automatically turns off once 15 minutes (after approximately 5 minutes when using the battery pack) have elapsed.
pIf you are experiencing problems, refer to troubleshooting guide (➜ page 36).
wRemove the card
Open the cover. | Press on the center of the card. | Pull it straight out. |
RQT8237
14
14