Panasonic TX-27LWD500A Getting Started Battery Installation and Replacement, Using the LCD Stand

Getting Started

Battery Installation and Replacement

		2 x “AA” Batteries
1	2	3

Place your fingernail under the battery cover hook. Apply a slight downward and backward pressure and lift the cover off.

Insert the batteries ensuring the correct polarity.

Fit the battery cover and click it into place.

•Do Not use rechargeable batteries.

•Do Not mix battery types

•Do Not mix old and new batteries. Replace both batteries at the same time.

•Do Not attempt to recharge batteries.

•Do Not short circuit batteries.

•Do Not disassemble batteries.

•Do Not heat or burn batteries.

Using the LCD Stand

You can adjust the angle of the LCD panel to suit. The panel can swivel 15° left or right.

15° 15°

Connectors

F RF S-VIDEO RCA

RCA connectors are used for video and audio connections.

F and RF connectors are used for connecting antenna leads.

The S-VIDEOconnector is used for Video only.

Audio		Video
Red	Right	Yellow	Composite video
White	Left	Green	Component Video (Y)
		Red	Component Video (Pr)
		Blue	Component Video (Pb)

NOTE: take care not to mix the two red RCA connectors.

6