Panasonic DMP-BDT210, DMP-BDT110 owner manual Picture

Page 35

This unit does not recognize the USB connection correctly.

¾If USB device is connected to this unit while playing a disc or in a video communication the connection will not be recognized. Press [HOME] and reconnect USB device.

¾[BDT210] : USB memory and USB HDD are not recognized via the rear USB port of this unit.

¾Disconnect and reconnect the USB cable. If it still does not recognize the connection, turn the power of this unit off and on again.

¾USB devices connected using a USB extension cable other than the supplied with the Wireless LAN Adaptor DY-WL10 (optional) [BDT110] or a USB hub may not be recognized by this unit.

¾If you connect USB HDD to this unit, use USB extension cable that is supplied with the HDD.

¾If two USB memory and USB HDD are connected simultaneously, they will not be recognized by this unit.

Picture

The images from this unit do not appear on the television.

Picture is distorted.

¾An incorrect resolution is selected in “HDMI Resolution”. Reset the setting as follows:

1 While the unit is on, press and hold [OK], [B] and [Y] on the remote control at the same time for more than

5 seconds.

– “00 RET” is displayed on the unit’s display.

2Repeatedly press [1] (right) on the remote control or

[POWER Í/I] on the unit until “04 PRG” is displayed on the unit’s display.

3Press and hold [OK] on the remote control or [< OPEN/

CLOSE] on the unit for at least 3 seconds. Set the item again. ( 31)

– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not output in bitstream, select “Yes” in “Restore Default Settings” and make proper settings. ( 33)

¾When “3D BD-Video Playback” in the Setup menu is set to “Automatic”, images may not be output depending on the connection method. After removing the disc from this unit, select “Set before play” in the Setup menu, and

select “2D Playback” in the setup screen displayed when playing 3D discs. ( 29)

Video is not output. [BDT210]

¾Set “High Clarity Sound” in the Playback menu to “Off”

to use the VIDEO OUT terminal. ( 28)

Video is not output in high-definition.

¾Confirm that “HDMI Resolution” in the Setup menu is set properly. ( 31)

3D video is not output.

¾Is there a non-3D compatible amplifier/receiver

connected between this unit and a TV? ( 9)

¾ Are the settings on this unit and the TV correct? ( 20)

¾Is the amplifier/receiver that is connected between this unit and TV on?

3D video is not output correctly as 2D.

¾Select “Set before play” in the Setup menu, and select “2D Playback” in the setup screen displayed when

playing 3D discs. ( 29)

¾Discs that have recorded titles with Side by side

(2 screen structure) and that can be enjoyed in 3D are played back in accordance with the settings of the TV.

No subtitles.

¾When progressive output is on, closed captions/subtitles cannot be displayed.

The subtitles overlap closed captions recorded on discs.

¾Turn off the subtitles or turn off the closed caption

setting on the TV. ( 27)

A black band is displayed around the edge of the screen.

The aspect ratio of the screen is abnormal.

¾ Confirm the “TV Aspect” is set properly. ( 31)

¾Adjust the aspect setting on the television.

Audio

Cannot switch audio.

¾When connecting an amplifier/receiver using an OPTICAL terminal or an HDMI terminal, you cannot

switch the audio if “Digital Audio Output” is set to “Bitstream”. Set “Digital Audio Output” to “PCM”. ( 30)

Cannot hear the desired audio type.

¾Check the connections and the “Digital Audio Output”

settings. ( 9, 30)

¾To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to “On” in the Setup menu. ( 32)

Reference

VQT3B58 35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Illustration shows the image of DMP-BDT210 Blu-ray DiscTM PlayerModel No. DMP-BDT210 Inside of product Following Applies only in the U.S.A. FCC NoteTable of contents Unit and media care AccessoriesUsing the remote control Control reference guide Power button Power Í/IPlayable discs/Cards/USB devices Type Logo examples Type detail Playable contentsBD-Video Discs that cannot be played in this UnitRegion management information Finalize≥ Connect terminals of the same color Connecting to a TVHdmi cable Audio/Video cableAmplifier/receiver Connecting to an amplifier/receiverHdmi cable Multi channel speakers For details about connection method, refer to Connecting to a broadband network≥ Firmware can be updated ≥ You can enjoy BD-Live ≥ You can access other devices Home NetworkBDT210 Precautions of Wireless LAN connectionPress Í Power Connecting to an AC power sourceSettings Easy SettingSearch for wireless network Network Easy SettingWired connection Wireless connectionWhen you experience problems with settings Firmware updates Reprogramming the remote controlHome menu Press Í Power to turn on the unitContents or the title Inserting or removing mediaPlaying video contents About Divx Video About Divx VIDEO-ON-DEMAND Useful functionsDisplaying subtitle text Press SUB Menu Select an item, then press OKDeleting data/Formatting SD cards Enjoying BD-Live or picture-in-picture in BD-VideoEnjoying BD-Live discs with Internet Playing picture-in-picturePress Select an item, then press OK 3D settingsEnjoying 3D video Press 3, 4, 2, 1 to select the still picture and press OK Playing still picturesTo show the still picture properties Press 3, 4 to select the folder and press OKPress 3, 4 to select the track and press Playing musicPlaying a track in another folder Press 3, 4, 2, 1 to select the item Press OK Enjoying Viera CasttmPress Viera Cast Playing contents saved on other equipment Play back the contents in the Dlna server using DMC Linked operations with Easy control only with Viera remote controlAutomatic input switching Power on link Power off linkDisc Playback menuAudio PlayVideo Setup menu DTS/DTS-HD TV / Device Connection DisplayViera Cast NetworkOthers Cannot eject disc Troubleshooting guideGeneral operation Picture Can’t connect to the network Disc cannot be playedStill pictures Jpeg do not play back normally Can’t play back BD-LiveOn the unit’s display MessagesOn the television Display languages list Language code listSupplemental information Audio information SpecificationsFile format 40 VQT3B58 For hearing or speech impaired TTY users, TTY Mail-In ServiceLimited Warranty Limits And Exclusions Panasonic Exchange Center George McVay Drive Suite BAmbler Drive, Mississauga, Ontario L4W 2T3 Limited Warranty Only for CanadaPanasonic Product Limited Warranty Please locate your nearest Authorized ServicentreReproducción básica Referencia rápida enConexiones básicas On-screen Viera LinkTM Soundtrack Subtitle Wireless LANIndex Audio MMedia Renderer
Top Page Image Contents