Panasonic TH-PH10 manual Options Adjustments, Options1/3

Page 39

Options Adjustments

1

2

3

4

5

6

Press to display the Setup menu.

Press to select “OSD Language”.

Press and hold until the Options menu is displayed.

Press to select your preferred menu.

Press to adjust the menu.

Press to exit from

Options menu.

Options1/3

Weekly Command Timer

Onscreen display		On
Initial INPUT		Off

Initial VOL level	Off	0

Maximum VOL level	Off	0

INPUT lock		Off

Button lock		Off

Remocon User level		Off

Advanced PIP		Off

Item		Effect				Adjustments
Weekly
Command					Sets Weekly Command Timer. (see page 43)
Command					Sets Weekly Command Timer. (see page 43)
Timer
					On:	Displays all the following on screen.
					• Power on display
Onscreen					• Input signal switch display
display	On		Off		• No signal display
					• Mute and the remaining time of off-timer after was pressed.
					Off:	Hides all the items above from view.

	Off	PC	INPUT1	INPUT2	INPUT3
	Adjusts the input signal when the unit is turned on.
	Notes:
	• Only the adjusted signal is displayed. (see page 18).
Initial INPUT	• Signal can be displayed when the Terminal board is installed.

•This menu is available only when “INPUT lock” is “Off”.

•When a dual input terminal board is attached, A or B is displayed depending on the selected input signal. (Ex. INPUT1A, INPUT1B)

•Setting of SLOT3 is not available on TH-37PH10UK.

39

Image 39

Contents Operating Instructions Manual de instrucciones English EspañolModel No. Número de modelo Risk of Electric Shock Do not Open Important Safety Instructions Table of Contents Trademark Credits FCC StatementWhen using the Plasma Display Safety PrecautionsAC Power Supply Cord MaintenanceSafety Precautions / Maintenance SetupAccessories Accessories SuppliedRemote Control Batteries Connections SpeakersAC cord ﬁxing Signal Names for Mini D-sub 15P Connector PC Input Terminals connectionConnections Basic format for control data CommandSerial Terminals connection Communication parametersAV & Component / RGB connection RGB signal R, G, BFix the AC cord plug securely to the Plasma Display. see Power on / OFFConnecting the AC cord plug to the Plasma Display Connecting the plug to the Wall OutletBasic Controls Basic Controls On-Screen Menu Displays VA N C E D SettingsTime / Power OFF Time On Time / Power OFFOn-Screen Menu Displays INPUT1A INPUT1B INPUT2 PC Selecting the input signalInitial selections Selecting the On-Screen Menu LanguageDuring Multi PIP Operations Aspect ControlsNormal Zoom Full Panasonic AutoEliminate the ﬂickering and distortion Adjusting POS. /SIZEClock Phase RGB/PC in modeMulti PIP 1280x768@60Hz DVI Advanced PIPOne screen Advanced PIP Press to exit from Options menu Sub screen Main screenStandard Cinema Dynamic Picture AdjustmentsAdvanced Settings on Advanced Settings OFFEffect Details Advanced SettingsPicture Adjustments Effect AdjustmentsMute Sound AdjustmentSelect the magniﬁcation required for the enlarged display Digital ZoomDisplay the operation guide PositionPresent Time Setup Press to set up DAY or Present Time of DAYButton Forward SET UP Timer Display the SET UP Timer Screen Press to selectPower on Time / Power OFF Time Negative / Scroll selection Mode selectionStart setting Screensaver For preventing image retentionSetup of Screensaver Time Reduces screen image retentionScreensaver For preventing image retention Side BAR Adjust OFF Dark MID BrightPress to exit from Screensaver Reduces power consumption Customizing the Input labelsAddition sign Selected Input Press to select × 1, × 2, × 3, × SET UP for Multi DisplayHow to setup Multi Display Press to select Vertical ScaleDisplay Number locations for each arrangement Examples SET UP for Multi DisplayID Cancellation Seam Hides Video SettingID Remote Control Function ID remote control button operationSelect SET UP for Input SignalsComponent / RGB in Select 3D Y/C Filter For Ntsc AV imagesSET UP for Input Signals Color System / Panasonic AutoPulldown / Video NR FREQ. kHz / V-FREQ. Hz Setting RGB sync signalSync Refresh RateOptions1/3 Options AdjustmentsOff Initial VOL Sets normal volume Level Options AdjustmentsEnable Normalization Weekly Command Timer Press to set each item Press to select a command numberPress to select Time / Command Time Set the time to execute a command programShipping condition Plasma Display panel TroubleshootingRGB VIDEO/COMPONENT/RGB/PC input signalsVideo input PAL60Command list of Weekly Command Timer TH-37PH10UK TH-42PH10UK SpeciﬁcationsTH-50PH10UK TH-58PH10UK SpeciﬁcationsLimits and Exclusions Limited Warranty Statement Panasonic Canada Inc Customer’s RecordPanasonic Broadcast & Television Systems Company Executive Ofﬁce