Panasonic TH-PH10 manual Initial selections, Selecting the input signal, INPUT1A INPUT1B INPUT2 PC

Page 18

Initial selections

Selecting the input signal

Select the input signals to be connected by installing the optional Terminal Boards.

Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display.

Input signals will change as follows:

• TH-37PH10UK

INPUT1A INPUT1B INPUT2 PC

SLOT1 is for dual input so that you can select INPUT1A or

INPUT1B for INPUT1.

INPUT1A : VIDEO signal terminal in SLOT1

INPUT1B : S-VIDEO signal terminal in SLOT1

•TH-42PH10UK, TH-50PH10UK, TH-58PH10UK

INPUT1 INPUT2A INPUT2B INPUT3 PC

SLOT2 is for dual input so that you can select INPUT2A or

INPUT2B for INPUT2.

INPUT2A : VIDEO signal terminal in SLOT2

INPUT2B : S-VIDEO signal terminal in SLOT2

Notes:

•Selecting is also possible by pressing the INPUT button on the unit.

•Input terminal will not be selected if the terminal board is not installed into the SLOT.

•Select to match the signals from the source connected to the component/RGB input terminals. (see page 36)

•In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.

INPUT MENU -/ VOL +/ ENTER/

Selecting the On-Screen Menu Language

Press to display the SET UP menu. Press to select OSD LANGUAGE.

Press to select your preferred language.

Selectable languages

English(UK)

Deutsch

Français

Italiano

Español

ENGLISH(US)

.......(Chinese)

.......(Japanese)

Русский .......(Russian)





SET UP			1/2

SIGNAL

COMPONENT/RGB-IN SELECT

	RGB

INPUT LABEL	PC

POWER SAVE	OFF

STANDBY SAVE	OFF

POWER MANAGEMENT	OFF

AUTO POWER OFF	OFF

OSD LANGUAGE	ENGLISH (US)

18

Image 18

Contents Operating Instructions Manual de instrucciones English EspañolModel No. Número de modelo Risk of Electric Shock Do not Open Important Safety Instructions Table of Contents FCC Statement Trademark CreditsSafety Precautions When using the Plasma DisplaySetup MaintenanceSafety Precautions / Maintenance AC Power Supply CordAccessories Accessories SuppliedRemote Control Batteries Connections SpeakersAC cord ﬁxing Signal Names for Mini D-sub 15P Connector PC Input Terminals connectionConnections Communication parameters CommandSerial Terminals connection Basic format for control dataRGB signal R, G, B AV & Component / RGB connectionConnecting the plug to the Wall Outlet Power on / OFFConnecting the AC cord plug to the Plasma Display Fix the AC cord plug securely to the Plasma Display. seeBasic Controls Basic Controls VA N C E D Settings On-Screen Menu DisplaysTime / Power OFF Time On Time / Power OFFOn-Screen Menu Displays Selecting the On-Screen Menu Language Selecting the input signalInitial selections INPUT1A INPUT1B INPUT2 PCPanasonic Auto Aspect ControlsNormal Zoom Full During Multi PIP OperationsRGB/PC in mode Adjusting POS. /SIZEClock Phase Eliminate the ﬂickering and distortionMulti PIP Sub screen Main screen Advanced PIPOne screen Advanced PIP Press to exit from Options menu 1280x768@60Hz DVIAdvanced Settings OFF Picture AdjustmentsAdvanced Settings on Standard Cinema DynamicEffect Adjustments Advanced SettingsPicture Adjustments Effect DetailsSound Adjustment MutePosition Digital ZoomDisplay the operation guide Select the magniﬁcation required for the enlarged displayPresent Time Setup Press to set up DAY or Present Time of DAYButton Forward SET UP Timer Display the SET UP Timer Screen Press to selectPower on Time / Power OFF Time Screensaver For preventing image retention Mode selectionStart setting Negative / Scroll selectionSetup of Screensaver Time Reduces screen image retentionScreensaver For preventing image retention Side BAR Adjust OFF Dark MID BrightPress to exit from Screensaver Reduces power consumption Customizing the Input labelsAddition sign Selected Input Press to select Vertical Scale SET UP for Multi DisplayHow to setup Multi Display Press to select × 1, × 2, × 3, ×SET UP for Multi Display Display Number locations for each arrangement ExamplesID remote control button operation Seam Hides Video SettingID Remote Control Function ID Cancellation3D Y/C Filter For Ntsc AV images SET UP for Input SignalsComponent / RGB in Select SelectSET UP for Input Signals Color System / Panasonic AutoPulldown / Video NR Refresh Rate Setting RGB sync signalSync FREQ. kHz / V-FREQ. HzOptions Adjustments Options1/3Options Adjustments Off Initial VOL Sets normal volume LevelEnable Normalization Weekly Command Timer Time Set the time to execute a command program Press to select a command numberPress to select Time / Command Press to set each itemShipping condition Troubleshooting Plasma Display panelPAL60 VIDEO/COMPONENT/RGB/PC input signalsVideo input RGBCommand list of Weekly Command Timer Speciﬁcations TH-37PH10UK TH-42PH10UKSpeciﬁcations TH-50PH10UK TH-58PH10UKLimits and Exclusions Limited Warranty Statement Executive Ofﬁce Customer’s RecordPanasonic Broadcast & Television Systems Company Panasonic Canada Inc