Panasonic TH-61PHW6 manual Basic Controls, Videos VIDEO, Component

Basic Controls

R - STANDBY

GPOWER ON

TH-61PHW6

Main POWER ON/OFF Switch

INPUT — VOL +

VOLUME Adjustment

Press the Volume Up “+”

Power Indicator

The Power Indicator will light.

•POWER-OFF Indicator not illuminated (The unit will still consume some power as long as the power cord is inserted into the wall outlet.)

•STAND-BY .....Red

•POWER-ON.....Green

INPUT button (VIDEO(S VIDEO), COMPONENT/RGB, PC Mode Selection)

Press the “INPUT” button to select VIDEO (S VIDEO), COMPONENT/RGB, PC input signal modes sequentially.

(see page 19)

or Down “–” button to increase or decrease the sound volume level.

STAND-BY(ON/OFF) button
The Plasma Display must first be plugged into the wall
outlet and turned on at the power switch (see page 18).						SURROUND button
Press this button to turn the Plasma Display ON, from STAND-
						(see page 28)
BY mode. Press it again to turn the High Definition Plasma
Display OFF to STAND-BY mode.						INPUT button
	STATUS button					(VIDEO(S VIDEO), COMPONENT/
						RGB, PC Mode Selection)
Press the “STATUS” button to
						Press to select VIDEO(S VIDEO),
display the current system status.
						COMPONENT / RGB, PC input signal
VIDEO		1				modes sequentially. (see page 19)
N O R M A L		2
					INPUT	Sound mute On/Off (see page 27)
				SURROUND		VOLUME Adjustment
OFF TIMER	90	3		VOL		Press the Volume Up “+” or Down
1 VIDEO(S VIDEO), COMPONENT						“–” button to increase or decrease
/ RGB, PC mode			N		R	the sound volume level.
2 ASPECT mode (see page 23)
						R button (see page 21)
3 OFF TIMER
The off timer indicator is displayed						ACTION button
only when the off timer has been set.
						Press to make selections
		N button
(see page 21, 26, 27, 29)						POSITION buttons
			PICTURE	SOUND	SET UP
	PICTURE button					SET UP button (see page 33)
		(see page 29)				SOUND button (see page 27)
			PICTURE
			POS. /SIZE		ASPECT

PICTURE POS./SIZE button	ASPECT button
(see page 25)	Press to adjust the aspect.
	(see page 23)
PC	OFF TIMER

PC button Press the “PC” mode selection button to select the PC mode.

This button is used to switch directly to PC mode.

OFF TIMER button

The Plasma Display can be preset to switch to stand-by after a fixed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed.

When three minutes remain, “OFF TIMER 3” will flash. 30 60 90

The off timer is cancelled if a power interruption occurs. 0

10