Slide the latch (A) and open the cov- er.
Using the Drive
Inserting/Removing the Drive
For details on how to insert and remove the drive, refer to “Multimedia Pocket” in the Reference Manual included with your computer.
Preparations
Confirm that [Transfer Mode] is set to [DMA if available] in [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager] - [IDE ATA/ ATAPI controllers] - [Primary IDE Channel] - [Advanced Settings] - [Device 0]. Perform this setting if it has not yet been made.
ESetting a Disc
1 Turn on the computer.
2
3 Press the eject button (B) and slowly pull out the tray.
4 Insert/Remove the disc.
To insert
Set the disc with the label side up and press the center of the disc until it clicks in place.
To remove
Press on the center spindle (C) and carefully lift up the edge of the disc.
5 Close the tray.
Do not press the eject button.
8