Panasonic TH-50PV500A, TH-42PV500A operating instructions Setup menu, Freq. / V-freq

PC mode

Setup menu

During PC mode

Press the MENU button.

Move to choose Setup menu.

Access Setup menu.

Move to choose menu option.

Adjust chosen option or access chosen menu.

Press the EXIT button at any time to exit Setup menu.

MENU

EXIT

Main menu

Picture menu

	Sound menu
	Setup menu
Setup menu
PC setup		Access
Side panel		Off
Power save		Off
PC setup
Input resolution		VGA
Clock
H-pos
V-pos
Clock phase
Sync		H & V

PC setup		Access to adjust chosen option.
Input	: Displayed during VGA(640 × 480 dots), WVGA(852 × 480 dots), XGA(1,024 × 768 dots),
resolution		WXGA(1,366 × 768 dots) input signals.
		Select WVGA or WXGA during WVGA or WXGA input signal to avoid noise.
Clock	: If a periodic striped pattern (noise) occurs, carry out adjustments to reduce the noise to the
		lowest level.

H-pos : Adjust the horizontal position.

V-pos : Adjust the vertical position.

Clock phase	: Eliminate the flickering and distortion.
	Carry out this adjustment after adjusting Clock.
	Adjust to reduce noise to the most inconspicuous level.
Sync	: H & V - To synchronize by the horizontal and vertical signals from your PC.
	On G - To synchronize by the green signal form your PC (if available).

Side panel, Power save

About settings, see page 21.

H-freq. / V-freq.

If the input signal is not applicable, the characters will turn to red.

For applicable PC signals information see page 41.

26