Picture menu

Press the MENU button.

Move to choose Picture menu.

Move to choose menu option.

Adjust chosen option or access chosen menu.

Press the EXIT button at any time to go back to watching TV.

1 2 3

4 5 6

7 8 9

EXIT

Menu	Menu mode will be memorized for each TV, AV1, AV2, AV3,
	AV4, PC, HDMI and Card operations mode.
	Dynamic / Standard / Cinema / Auto
	You can change the level of each Item (Contrast,
	Brightness, Colour, Sharpness, NTSC-Tint, Colour
	temperature, Colour management, D.PNR, MPEG NR and
	3D-COMB) for each Menu (Dynamic, Standard, Cinema and
	Auto) according to your personal preference.

Increase or decrease the levels of these options according to your personal preference.

NTSC-Tint (Tint) The picture hue can be adjusted to suit your taste.

Notes:

•When the TV is receiving NTSC signals, NTSC-Tint is displayed and level adjustment is possible.

•When the TV is receiving YUV (60Hz) or HDMI (60Hz) signals, Tint is displayed and level adjustment is possible.

Colour	Allows you to set the overall colour tone of the picture.
temperature	Choose from Cool, Standard and Warm.
Colour	Enables vivid colour adjustment automatically.
management
D.PNR	Reduces noise in a channel with many noises.
	Off:	Recommended mode when receiving a strong signal.
	Strong:	Applies strong noise reductions regardless of input signals.
	Weak:	Applies weak noise reductions regardless of input signals.
	Auto:	Automatically reduces unwanted picture noise.
MPEG NR	Reduces MPEG noise.
	Off / Strong / Mid / Weak
	This function is effective in reducing the digital block noise when viewing DVD, VCD, SD card or
	digital broadcasting. The effect will be changed based on the scene and image.
	MPEG: Compression technology of the image signal adopted by DVD, VCD, SD card or digital
		broadcasting.
3D-COMB	Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen. Set 3D-
	COMB to On to display sharper and more accurate colours. Displayed only when receiving PAL or
	NTSC signals. Not displayed during S Video, Component, PC, HDMI input and Card operations.

Note:

By pressing the N button on the remote control while the Picture menu is displayed, the selected menu will be changed to the Normal mode.

Normalization will not occur if the menu is not displayed when the N button is pressed.

The Normal mode is the factory preset condition. Returning to this original condition is called “Normalization”.