Panasonic AJ-D950 manual User menu

USER menu

<BASIC>

	Item		Setting
							Description
No.	Superimposed	No.		Superimposed
	display				display
000	P-ROLL	0000				0S	This sets the preroll time which can be set from 0 to 15
		.		.
	TIME	.		.			seconds in 1-second increments.
		.		.
		0005				5S	<Note>
		.			.
		.		.			When the unit is set to automatic editing [PREVIEW, AUTO
		.		.
		0015				15S	EDIT], the unit will not operate if the preroll time is set to 0
							seconds.
001	LOCAL	0000				DIS	This selects the buttons which can be operated on the front
	ENA	0001			ST&EJ		panel when the REMOTE/LOCAL switch has been set to
		0002				ENA	REMOTE.
							0: No buttons can be operated.
							1: Only the STOP and EJECT buttons can be operated.
							2: All buttons except for the RECORDER and PLAYER
							buttons can be operated.
002	TAPE	0000				±12h	This selects the 12 or 24 hour display for the CTL counter.
	TIMER	0001				24h	0: 12 hour display
							1: 24 hour display
003	REMAIN	0000				OFF	This selects whether the remaining tape time is shown on the
	SEL	0001				ON	front panel.
							0: Not shown.
							1: Shown.
							<Note>
							Even when “Shown” is selected, the remaining tape time is not
							shown while the unit is calculating the remaining tape time
							after ejecting or inserting the cassette.
004	SETUP	0000				OFF	This selects whether the SETUP-MENU No. is displayed on-
	NUMBER	0001				ON	screen.
							0: The SETUP-MENU No. is not displayed.
							1: The SETUP-MENU No. is displayed.
005	METER	0000				CUE	This selects whether the level meters are to display the CUE
	SEL	0001			VIDEO		track signal level or the video signal level.
							0: The CUE track signal levels are displayed.
							1: The video signal levels are displayed.
006	SYNCHRO-	0000				OFF	This selects whether or not to synchronize between two VTRs.
	NIZE	0001				ON	0: No synchronization. The editing points deviate several
							frames, but editing can be started quickly.
							1: Synchronization. Allows for error-free editing.
007	SUPER	0000				OFF	This selects whether the time code and other super display
		0001				ON	which are output to the VIDEO OUT 3/SERIAL OUT 3 con-
							nector is to shown.
							0: Not shown.
							1: Shown.
008	DISPLAY	0000			TIME		This selects what information is to be provided by the time code
	SEL	0001			T&STA		and other super displays output to the VIDEO OUT 3/SERIAL
		0002			T&S&M		OUT 3 connector.
							0: Time only.
							1: Time and status.
							2: Time, status and mode.
							<Note>
							• An error message is displayed when an warning or error
							occurs.

The underline on the setting item denotes the initial setting.

– 47 –