Panasonic AJ-D950 manual Time code/user bit, User bit

Page 60

Time code/user bit

Time code

The time code is used when the time code signal generated by the time code generator (time code signal generator) is to be recorded on the tape, its values are to be read by the time code reader (time code signal reader), and the absolute position of the tape is to be displayed in increments of hours, minutes, seconds and frames.

The time code is written in the sub-code area (data area) of the helical track. This enables insert editing to be conducted independently using the time code alone. In addition, the VTR’s playback speed can be read from the stop mode to slow-motion playback up to high- speed play (approx. 50X normal speed/approx. 100X when using DVCPRO tape).

The time code values are indicated using the display and superimpose functions.

TCR 00 : 07 : 04 : 24

Frames

Hours Seconds

Minutes

User bit

“User bit” refers to the 32-bit (8-digit) data frame among the time code signals which has been released to users. It enables operator numbers values to be recorded.

The alphanumeric characters which can be used for the user bit are the figures 0 to 9 and the letters A to F.

– 61 –

Image 60
Contents Operating Instructions Contents General and Features FeaturesMenu-driven setup Multifunctional interfaceChannel high-sound-quality digital audio Controls and their functions Front panelFront Panel Top Section Input Select switches VideoAudio Input Select displayFront Panel Center Section 9TC/CTL switch @0TC/UB switch@1INT/EXT switch @2TAPE/EE switch In the stop mode@3REMOTE/LOCAL switch @7SHTL/SLOW switch@4REMOTE lamp @5Search button#0PREROLL button #1AUTO Edit button#2PREVIEW/REVIEW buttons #3IN a IN/SET/OUT a OUT buttons$6Headphones jack #8Time code buttons#9Warning lamp $0Cassette insertion display lamp$7Volume control $8MONITOR Select switches$9METER FULL/FINE selector switch Front Panel Bottom Section 7REC Inhibit switch 8TV System selector switch9MENU button 0SET buttonConnector area @2 @3AC in connector Signal GND terminalTime Code in connector Time Code OUT connector6ANALOG Component Video OUT connector 7ANALOG Composite Video OUT connectors8DIGITAL Audio IN/OUT connector 9SERIAL Digital Component AUDIO/VIDEO IN/OUT connectorConnections when one unit is used Set the Control switch on the front panel to LocalConnections when 2 units are used deck to deck Recorder DeviceVideo monitor Signals Audio monitor Connections with editing controllerWFM VSC Tapes Type DescriptionCassette Switching on the power/inserting the cassette Stand by PlayerSTOP/STAND by mode Still Timer Setting1Selecting video/audio input signals 2Adjusting the video level3Adjusting the audio level RecordingPlayback Jog mode Shuttle modeJog/shuttle Manual editing Preroll Automatic editing Deck to Deck Switch settings and adjustments When the unit is used as the recorderWhen the unit is used as the player Automatic editingSelect the editing mode Entering the edit points Match frame processing functionNegative duration function Checking the edit points Calculating the duration1Resetting both the edit in and OUT points 2Resetting either the edit in or OUT pointModifying the edit points Preview Executing automatic editing PostrollRetry function Auto tag editingReview Split editing Audio split editing Entering the edit pointsDeleting the edit points Modifying the edit pointsDisplaying the audio split edit points Cueing up the tape to the edit pointsDuration display OperationsVideo output encoder output signal adjustments Setup levelVideo level Chroma level and hueSetup default settings Changing the settingsSETUP-MENU Init SET YESPLAY/NOSTOP Setup setting menus Changing the fileSetting Description System menuUser menu Setup menus Basic Setting DescriptionAlarm EE ModeDelay SearchOperation Memory stop functionCAP.LOCK Auto REWPara RUN 9P SELID SEL OtherVAR IN/OUTManu DELEdit Setting Description SRC StepProtect HalfTime Code INT SG VsyncLOW RF FreezeVideo Setting Description CH3 CH4CH1 OUT CH2 OUTAudio Setting Description AJ-PD950 User menu Time code/user bit Time codeUser bit Setting the internal time code Recording internal/external time codesReproducing the time code/user bit Operation mode Superimpose screenCharacters displayed Display positionServo reference Servo reference setting tables During playback or special playbackDuring recording or editing Audio V Fade Function Audio recording channel and monitor output selection Audio recording channelMonitor output channel Printed circuit board Printed Abbr Factory Circuit Full name FunctionBoard Rack mounting Video head cleaning CondensationError messages Diag menuDisplaying the Diag menu Displaying the Hours Meter information Table of Auto OFF Error messages Power OFF→ONPower OFF on Counter display Monitor display Description VTR operationServo Control Hardware specifications External interface specificationsRS-232C interface IntroductionSoftware specifications ProtocolError code table ACK STX OPL ETXCommand table Commands relating to operation control NotesSTX OSR ETX ReverseStandby STX OBF ETX Standby STX OBN ETXCommands relating to inquiries Notes Microsoft QuickBASIC sample program CLSConnector signals Pin No. SignalSignal Transmit CommonPreroll Command RS-232C Remote 25-pin D-SUB crossover cable supportedFrame Ground GND
Related manuals
Manual 87 pages 25.97 Kb

AJ-D950 specifications

The Panasonic AJ-D950 and AJ-PD950 are professional digital video recorders that have earned a reputable position in the broadcast and production industries. These versatile devices combine advanced digital technology with user-friendly features, making them suitable for a wide range of applications, from live event coverage to high-end video production.

One of the notable features of the AJ-D950 is its ability to record in both DV and DVCPRO formats. This flexibility allows users to choose the best format for their specific needs, whether they require a higher-quality broadcast standard or a more compressed format for storage efficiency. The device supports both standard definition and high definition, providing broadcasters with the versatility to adapt to changing production demands.

The AJ-PD950 complements its predecessor with additional features tailored for enhanced usability and performance. Equipped with a powerful 25 Mbps data rate in DVCPRO mode, it ensures high-quality video output while maintaining manageable file sizes. The unit's dual-speed playback capabilities allow for real-time viewing and slow-motion playback, enabling editors to capture precise moments during post-production.

Both models feature an intuitive interface with a well-organized control layout, allowing for easy navigation through menus and settings. The LCD display offers clear visibility of vital operational information, including recording time, tape status, and battery life. Additionally, the presence of built-in speakers ensures that audio channels can be monitored without the need for external equipment.

Connectivity options are plentiful with the AJ-D950 and AJ-PD950, as they come equipped with various inputs and outputs, including SDI, HDMI, and analog connections. This wide range of interfaces facilitates integration with other production equipment, enhancing workflow and efficiency in the studio or on location.

The compact and rugged design of both models makes them ideal for field use. Their lightweight build allows for easy transport, while the robust housing provides protection against the rigors of on-location shoots. The long battery life further ensures that these recorders can operate for extended periods, accommodating even the most demanding production schedules.

In conclusion, the Panasonic AJ-D950 and AJ-PD950 are sophisticated yet user-friendly digital video recorders that offer exceptional performance and flexibility. Their advanced recording capabilities, ease of use, and extensive connectivity options make them valuable tools for professionals in the ever-evolving world of video production. Whether for broadcast, event coverage, or creative projects, these recorders stand out as reliable choices in the market.