Panasonic AJ-D950 Int Sg, Vsync, Low Rf, Freeze, Field, Frame, Out C, Kill, Color, Add, Sdi Out

Setup menus

USER menu

<VIDEO>

	Item		Setting
						Description
No.	Superimposed	No.		Superimposed
	display				display
600	INT SG	0000			OFF	This selects whether to generate the internal signal.
		0001			BB	0: Signal is not generated.
		0002			CB	1: The black burst is generated.
						2: 100% color bars are generated.
601	OUT	0000			N-VF	This selects whether to float the vertical sync position of the
	VSYNC	0001			VF	video output in order to align the video output phase with the
						input in the EE/record/edit modes.
						0: Signals are not floated.
						1: Signals are floated.
602	V-MUTE	0000			N-MUTE	This selects whether the video output signal is set to MUTE
	SEL	0001			LOW RF	when LOW RF is detected during playback.
						0: No muting. (Freeze)
						1: Muting. (Set to gray.)
603	CC (F1)	0000			BLANK	This selects ON or OFF for the closed caption signal in the
	BLANK	0001			THRU	first field.
						0: Forced blanking performed.
						1: Blanking not performed.
604	CC (F2)	0000			BLANK	This selects ON or OFF for the closed caption signal in the
	BLANK	0001			THRU	second field.
						0: Forced blanking performed.
						1: Blanking not performed.
605	FREEZE	0000			FIELD	This selects the freeze mode for still pictures.
	SEL	0001			FRAME	0: Field freeze.
						1: Frame freeze.
						<Note>
						When frame freeze has been selected, the frame slow status
						is established with the slow setting.
606	OUT C	0000			B/W	This selects chroma color killer processing for the video output
	KILL	0001			COLOR	signals.
						0: The signals are forcibly processed as B/W signals.
						1: The signals are automatically processed.
607	V OUT	0000			THRU	This selects the composite output signal.
	SETUP	0001			ADD	0: The signal is output without setup.
						1: The signal is output with 7.5% setup.
						<Note>
						This setup menu is not displayed in the 625 mode.
608	SDI OUT	0000			COMPNT	This selects the SERIAL OUT signal format.
	SEL	0001			COMPST	0: The component 4:2:2 signal is output.
						1: The composite signal is output. (option)
609	EDH	0000			OFF	This selects whether to superimpose EDH onto the serial
		0001			ON	output signals.
						0: EDH is not superimposed.
						1: EDH is superimposed.
610	PB/PR	0000			MII	This selects the component input signal level.
	IN LV	0001			B-CAM	0: MII level.
						1: ß cam level.
611	INPUT	0000			B/W	This selects color killer processing for the video input signals.
	C KILL	0001			AUTO	0: The signals are forcibly processed as B/W signals.
						1: The signals are automatically processed.
612	IN FRM	0000			FORCED	This selects the conditions under which frame detection is to
	DET	0001			AUTO	be performed when signals are input.
						0: Frame detection is performed at all times.
						1: Frame detection is prohibited only when non-standard
						signals are input.

The underline on the setting item denotes the initial setting.

– 56 –