Panasonic DMR-E85H operating instructions Flexible Recording, Recording from an external equipment

Page 18

Recording television programmes

Refer to the control reference on page 16.

Flexible Recording

[HDD] [RAM] [DVD-R]

The unit sets the best possible picture quality that fits the recording within the remaining disc space.

e.g.,

Recording from an external equipment

[HDD] [RAM] [DVD-R]

Preparation

≥Connect a video cassette recorder, decoder or satellite/digital receiver, etc. to this unit’s input terminals.

≥When recording bilingual programmes [HDD] [RAM]

Recording

Recorded

Remain

 

 

45 minutes in SP mode

60 minutes

Programme to be recorded

Preparation

Select the channel to record.

Perfectly fit!

Recording rate

between SP and LP

When both M 1 and M 2 is selected on the connected equipment, you can select the audio type in playback.

[DVD-R]

Select either M 1 or M 2 on the connected equipment. (You cannot select the audio type in playback.)

≥When the output signal from the external equipment is NTSC, change the “TV System” to “NTSC” in the SETUP menu

(➡page 43).

≥To reduce noise in input from external equipment, set “AV-in NR” to “On” in the SETUP menu (➡page 39).

≥Press [HDD] or [DVD] to select the recording drive.

e.g., Connecting other video equipment to the AV3 input

terminals

 

 

This unit

OPEN/CLOSE

REC

 

TIME SLIP

HDD DVD

 

 

TIME SLIPCH

1While stopped

Press [FUNCTIONS].

2Press [3, 4, 2, 1] to select

“FLEXIBLE REC” and press [ENTER].

FLEXIBLE REC

Recording in FR mode

Maximum rec. time

3 Hour 00 Min.

 

Set rec. time

 

3 Hour 00 Min.

 

 

 

 

 

 

Start

 

 

Cancel

 

SELECT

 

 

 

 

 

RETURN

 

3Press [2, 1] to select “Hour” and “Min.” and press [3, 4] to set the

recording time.

≥You cannot record more than 8 hours.

≥You can also set the recording time with the numbered buttons.

4When you want to start recording

Press [3, 4, 2, 1] to select “Start” and press [ENTER].

≥Recording starts.

≥The recording mode becomes FR mode.

To exit the screen without recording

Press [RETURN].

To stop recording partway

Press [∫].

To show the remaining time

Press [STATUS].

Remaining

DVD-RAM

REC 59

 

 

time

ARD

 

 

 

 

L R

 

 

 

RQT7664

18

S-VIDEO IN

VIDEO IN L/MONO - AUDIO IN - R

Yellow White Red

S-Video cable§

Audio/Video cable

Other video equipment

If the audio output of the other equipment is monaural, connect to L/ MONO.

§The S-VIDEO terminal achieves a more vivid picture than the VIDEO terminal.

1While stopped

Press [INPUT SELECT] to select the input channel for the equipment you have connected.

e.g., If you have connected to AV3 input terminals, select “A3”.

2Press [REC MODE] to select the

recording mode (XP, SP, LP or EP).

≥Using Flexible Recording (➡left), you can save content of a video cassette to 1 disc with the best possible quality of recording without wasting disc space.

3When recording from other video equipment

Start play on the other equipment.

When recording from decoder or satellite/digital receiver

Select the channel on the other equipment.

4Press [¥ REC].

Recording starts.

To skip unwanted parts

Press [;] to pause recording. (Press again to restart recording.)

To stop recording

Press [∫].

Almost all videos and DVD software on sale have been treated to prevent illegal copying. Any software that has been so treated cannot be recorded using this unit.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Operating Instructions Instrucciones de funcionamiento Example EjemploStarted Table of contents Useful featuresPlease check and identify the supplied accessories AccessoriesRemote control BatteriesMain unit Remote controlControl reference guide Unit’s displayWhen the unit is not to be used for a long time Recommended connection for your televisionDo not connect the unit through a video cassette recorder Connecting a television with 21-pin Scart terminal and VCR AV1 terminalVideo OUT terminal ConnectionComponent video output Component Video OUT terminalConnecting an amplifier or system component To enjoy multi-channel surround sound on DVD-VideoConnection to a stereo amplifier Enter Preset Download Setup with Q Link functionsIf the clock setting menu appears ReturnAuto-Setup starts. This takes about 8 minutes Auto-Setup Setup without Q Link functionsCountry setting menu appears Auto-Setup is complete when you see the television picturePress Functions Press 3, 4, 2, 1 to select Setup and press EnterSelecting television type and aspect To enjoy progressive videoTo change the code on the remote control When the following indicator appears on the unit’s displayPoint the remote control at the television Television operationPlay-only discs 12 cm/8 cm HDD and Disc informationHDD and discs you can use for recording and play Discs that cannot be playedHDD Hard disk drive handling care GettingRecording television programmes Press W X CH to select the channelPress ¥ REC to start recording Recording modes and approximate recording times Playing while you are recordingDirect TV Recording Flexible Recording Recording from an external equipmentPress F Timer Timer recordingUsing Showview number to make timer recordings Press ShowViewPress PROG/CHECK Manually programming timer recordingsPress 3, 4 to select New Timer Press 1 to move through the itemsLinked timer recordings with external equipment EXT Link Check, change or delete a programmePress EXT Link Playing discs BackPlaying Time Time Slip Operations during playSkipping the specified Manual SkipPress Audio Editing operations during playChanging audio Press Erase Press 2, 1 to select Erase and press EnterPress 3, 4, 2, 1 to select a group Using menus to play MP3Using the tree screen to find a group Press TOP MenuOn-screen menus Using on-screen menus and Status messagesDisc menu-Setting the disc content Press DisplayPlay menu-Change the play sequence Status messagesPress Status Picture menu-Change the picture qualityPress Direct Navigator Press 3, 4, 2, 1 to select the title Editing titles/chaptersEditing titles/chapters and playing chapters Press 3, 4, 2, 1 to select the chapterPress 2, 1 to select Yes and press Enter Set up Protection §Title operations Press Enter at the start point and endPress 3, 4, 2, 1 to select Play List and press Enter Press 3 to cancelCreating, editing and playing play lists Creating play listsMove Editing and playing play lists/chaptersPlay list operations ChapterPress 3, 4 To select a Character and press Enter Entering textShow Enter Name screen Press SETTransferring dubbing titles or play lists Transfer DubbingPress Enter to confirm One Touch Transfer dubbingPress Dubbing DubbingTo edit the transferring dubbing list Press 3, 4 to select Start Dubbing and press EnterTransferring dubbing a finalized DVD-R DubbingPress 3, 4, 2, 1 to select Disc Management and press Enter Functions windowPress 3, 4, 2, 1 to select an item and press Enter Press 3, 4 to select the operation and press EnterDisc Protection Disc NameTop Menu Format DiscSummary of settings Changing the unit’s settingsCommon procedures Convenient functionsTabs Menus Options Underlined items are the factory presets PictureFunctions Progressive AV2 SettingsTV Aspect TV SystemPress 3, 4, 2 TuningPress 3, 4 to select Manual and press Enter Programme positionPress 3, 4, 2, 1 to select a country and press Enter Auto-Setup RestartTo change the setting all at once PAL!#NTSC TV SystemClock settings Child LockSpecifications Safety precautionsGlossary Link When ShowviewWhen programming Message Message appears whenCover Frequently asked questionsSet upPage RecordingError messages On the televisionOn the unit’s display Breaks Troubleshooting guideFollowing do not indicate a problem with this unit ≥Set the clock DisplayRemote control doesn’t Low volumeCannot switch audio Sound No soundTroubleshooting guide Maintenance Unit careDisc handling Index RGB
Related manuals
Manual 52 pages 43.42 Kb
Top Page Image Contents